Qt + Ogre3D. I cannot build a very simple example

[SGaist]

Then you should start by making a minimal Ogre only application build and then add Qt to the mix.

And if it still fails, you should check with the Ogre folks.

Note that you would likely have less trouble using a classic dynamic build of Ogre.

[8Observer8]

My goal now is to check can Ogre works with Qt for static or not. If it cannot I will continue usage of OpenGL, and I will not spend my time for Ogre. And I want to check can I integrate Ogre inside of Qt Widget for static build.

This message Target "BootstrapCMakeQt5Cpp" links to target "ZLIB::ZLIB" but the target was not found. says that I should to add ZLIB::ZLIB here:

target_link_libraries(BootstrapCMakeQt5Cpp PRIVATE Qt${QT_VERSION_MAJOR}::Widgets OgreBitesQt OgreRTShaderSystem ZLIB::ZLIB)

But before it I should to add this line: find_package(ZLIB). Ogre already has zlib. But it does not work again:

find_package(ZLIB)

find_package(OGRE REQUIRED COMPONENTS Bites RTShaderSystem CONFIG)
target_link_libraries(BootstrapCMakeQt5Cpp PRIVATE Qt${QT_VERSION_MAJOR}::Widgets OgreBitesQt OgreRTShaderSystem ZLIB::ZLIB)

It says again:

CMake Error at CMakeLists.txt:44 (add_executable):
  Target "BootstrapCMakeQt5Cpp" links to target "ZLIB::ZLIB" but the target
  was not found.  Perhaps a find_package() call is missing for an IMPORTED
  target, or an ALIAS target is missing?

[8Observer8]

I solved the problems with SDL2 and ZLIB that was in the message above. Now configuration is passing. But when I build it i see the same errors like in the first post with qmake:

CMakeLists.txt

cmake_minimum_required(VERSION 3.5)

project(BootstrapCMakeQt5Cpp LANGUAGES CXX)

set(CMAKE_INCLUDE_CURRENT_DIR ON)

set(CMAKE_AUTOUIC ON)
set(CMAKE_AUTOMOC ON)
set(CMAKE_AUTORCC ON)

set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
link_directories("E:/ProgramFiles/ogre-13.1.1/lib")

find_package(QT NAMES Qt6 Qt5 COMPONENTS Widgets REQUIRED)
find_package(Qt${QT_VERSION_MAJOR} COMPONENTS Widgets REQUIRED)

set(PROJECT_SOURCES
        main.cpp
)

if(${QT_VERSION_MAJOR} GREATER_EQUAL 6)
    qt_add_executable(BootstrapCMakeQt5Cpp
        ${PROJECT_SOURCES}
    )
else()
    if(ANDROID)
        add_library(BootstrapCMakeQt5Cpp SHARED
            ${PROJECT_SOURCES}
        )
    else()
        add_executable(BootstrapCMakeQt5Cpp
            ${PROJECT_SOURCES}
        )
    endif()
endif()

#find_package(ZLIB REQUIRED)
add_library(ZLIB::ZLIB INTERFACE IMPORTED)
add_library(SDL2::SDL2 INTERFACE IMPORTED)
find_package(OGRE REQUIRED COMPONENTS Bites RTShaderSystem CONFIG)

target_link_libraries(BootstrapCMakeQt5Cpp PRIVATE Qt${QT_VERSION_MAJOR}::Widgets OgreBitesQt OgreRTShaderSystem)

main.cpp

#include "Ogre.h"
#include "OgreApplicationContextQt.h"
#include <QGuiApplication>

class MyTestApp : public OgreBites::ApplicationContextQt, public OgreBites::InputListener
{
public:
    MyTestApp();
    void setup();
    bool keyPressed(const OgreBites::KeyboardEvent& evt);
};

MyTestApp::MyTestApp() : OgreBites::ApplicationContextQt("OgreTutorialApp")
{
}

bool MyTestApp::keyPressed(const OgreBites::KeyboardEvent& evt)
{
    if (evt.keysym.sym == OgreBites::SDLK_ESCAPE)
    {
        getRoot()->queueEndRendering();
    }
    return true;
}

void MyTestApp::setup(void)
{
    // do not forget to call the base first
    OgreBites::ApplicationContextQt::setup();
}

int main(int argc, char *argv[])
{
    QGuiApplication qapp(argc, argv);
    MyTestApp app;
    app.initApp();
    app.getRoot()->startRendering();
    app.closeApp();
    return qapp.exec();
}

[8Observer8]

I added OgreApplicationContextQt.cpp directly in my code:

I added Q_OBJECT to MyTestApp.h. I have a little different errors:

These are all my files:

MyTestApp.h

#ifndef MYTESTAPP_H
#define MYTESTAPP_H

#include "Ogre.h"
#include "OgreApplicationContextQt.h"
#include <QtCore/QObject>

class MyTestApp : public OgreBites::ApplicationContextQt, public OgreBites::InputListener
{
    Q_OBJECT
public:
    MyTestApp();
    virtual ~MyTestApp() { }
    void setup();
    bool keyPressed(const OgreBites::KeyboardEvent& evt);
};

#endif // MYTESTAPP_H

MyTestApp.cpp

#include "MyTestApp.h"

MyTestApp::MyTestApp() : OgreBites::ApplicationContextQt("OgreTutorialApp")
{
}

bool MyTestApp::keyPressed(const OgreBites::KeyboardEvent& evt)
{
    if (evt.keysym.sym == OgreBites::SDLK_ESCAPE)
    {
        getRoot()->queueEndRendering();
    }
    return true;
}

void MyTestApp::setup(void)
{
    // do not forget to call the base first
    OgreBites::ApplicationContextQt::setup();

}

main.cpp

#include <QGuiApplication>
#include "MyTestApp.h"

int main(int argc, char *argv[])
{
    QGuiApplication qapp(argc, argv);
    MyTestApp app;
    app.initApp();
    app.getRoot()->startRendering();
    app.closeApp();
    return qapp.exec();
}

.pro

QT       += core gui

INCLUDEPATH += "E:\ProgramFiles\ogre-13.1.1\include\OGRE"
INCLUDEPATH += "E:\ProgramFiles\ogre-13.1.1\include\OGRE\Bites"
INCLUDEPATH += "E:\ProgramFiles\ogre-13.1.1\include\OGRE\RTShaderSystem"

LIBS += -L"E:\ProgramFiles\ogre-13.1.1\lib"
LIBS += -L"E:\ProgramFiles\ogre-13.1.1\lib\OGRE"

#LIBS += -lOgreBitesQtStatic
# -lOgreMeshLodGeneratorStatic
# -lOgrePagingStatic
# -lOgrePropertyStatic
LIBS += -lOgreBitesStatic -lRenderSystem_GL3PlusStatic -lOgreGLSupportStatic -lOgreOverlayStatic   -lOgreRTShaderSystemStatic -lOgreVolumeStatic -lPlugin_BSPSceneManagerStatic -lPlugin_DotSceneStatic -lPlugin_OctreeSceneManagerStatic -lPlugin_OctreeZoneStatic -lPlugin_ParticleFXStatic -lPlugin_PCZSceneManagerStatic -lRenderSystem_GLES2Static -lRenderSystem_GLStatic -lOgreMainStatic -lOgreTerrainStatic -lCodec_STBIStatic -lzlibstatic
LIBS += -lSDL2main -lSDL2.dll -lfreetype -lpugixml
LIBS += -lopengl32 -lgdi32

greaterThan(QT_MAJOR_VERSION, 4): QT += widgets

CONFIG += c++11

# You can make your code fail to compile if it uses deprecated APIs.
# In order to do so, uncomment the following line.
#DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000    # disables all the APIs deprecated before Qt 6.0.0

SOURCES += \
    MyTestApp.cpp \
    OgreApplicationContextQt.cpp \
    main.cpp

HEADERS += \
    MyTestApp.h

# Default rules for deployment.
qnx: target.path = /tmp/$${TARGET}/bin
else: unix:!android: target.path = /opt/$${TARGET}/bin
!isEmpty(target.path): INSTALLS += target

[8Observer8]

I try to compile the same very simple and basic example that I tried before with cmake. Сonfiguration with cmake was made without errors:

-- Found OGRE
--   static     : ON
--   components : Bites;MeshLodGenerator;Overlay;Paging;Property;RTShaderSystem;Terrain;Volume
--   plugins    : Plugin_BSPSceneManager;Plugin_OctreeSceneManager;Plugin_PCZSceneManager;Plugin_ParticleFX;RenderSystem_GL;RenderSystem_GLES2;RenderSystem_GL3Plus;Codec_STBI
--   media      : E:/ProgramFiles/ogre-13.1.1/Media
-- Configuring done
-- Generating done
-- Build files have been written to: E:/_Projects/Ogre3D/build-BootstrapCMakeQt5Cpp-Desktop_Qt_5_15_2_MinGW_32_bit-Debug
Elapsed time: 00:01.

But when I build the project I see a few new errors undefined reference to 'compressBound' and undefined reference to 'compress' in OgreSTBICodec.cpp:

I added OgreApplicationContextQt.cpp to the project:

CMakeLists.txt

cmake_minimum_required(VERSION 3.5)

project(BootstrapCMakeQt5Cpp LANGUAGES CXX)

set(CMAKE_INCLUDE_CURRENT_DIR ON)

set(CMAKE_AUTOUIC ON)
set(CMAKE_AUTOMOC ON)
set(CMAKE_AUTORCC ON)

set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
link_directories("E:/ProgramFiles/ogre-13.1.1/lib")

find_package(QT NAMES Qt6 Qt5 COMPONENTS Widgets REQUIRED)
find_package(Qt${QT_VERSION_MAJOR} COMPONENTS Widgets REQUIRED)

set(PROJECT_SOURCES
        MyTestApp.h
        MyTestApp.cpp
        OgreApplicationContextQt.cpp
        main.cpp
)

if(${QT_VERSION_MAJOR} GREATER_EQUAL 6)
    qt_add_executable(BootstrapCMakeQt5Cpp
        ${PROJECT_SOURCES}
    )
else()
    if(ANDROID)
        add_library(BootstrapCMakeQt5Cpp SHARED
            ${PROJECT_SOURCES}
        )
    else()
        add_executable(BootstrapCMakeQt5Cpp
            ${PROJECT_SOURCES}
        )
    endif()
endif()

#find_package(ZLIB REQUIRED)
add_library(ZLIB::ZLIB INTERFACE IMPORTED)
add_library(SDL2::SDL2 INTERFACE IMPORTED)
find_package(OGRE REQUIRED COMPONENTS Bites RTShaderSystem CONFIG)

target_link_libraries(BootstrapCMakeQt5Cpp PRIVATE Qt${QT_VERSION_MAJOR}::Widgets OgreBitesQt OgreRTShaderSystem)

MyTestApp.h

#ifndef MYTESTAPP_H
#define MYTESTAPP_H

#include "Ogre.h"
#include "OgreApplicationContextQt.h"
#include <QtCore/QObject>

class MyTestApp : public OgreBites::ApplicationContextQt, public OgreBites::InputListener
{
    Q_OBJECT
public:
    MyTestApp();
    virtual ~MyTestApp() { }
    void setup();
    bool keyPressed(const OgreBites::KeyboardEvent& evt);
};

#endif // MYTESTAPP_H

MyTestApp.cpp

#include "MyTestApp.h"

MyTestApp::MyTestApp() : OgreBites::ApplicationContextQt("OgreTutorialApp")
{
}

bool MyTestApp::keyPressed(const OgreBites::KeyboardEvent& evt)
{
    if (evt.keysym.sym == OgreBites::SDLK_ESCAPE)
    {
        getRoot()->queueEndRendering();
    }
    return true;
}

void MyTestApp::setup(void)
{
    // do not forget to call the base first
    OgreBites::ApplicationContextQt::setup();

}

main.cpp

#include <QGuiApplication>
#include "MyTestApp.h"

int main(int argc, char *argv[])
{
    QGuiApplication qapp(argc, argv);
    MyTestApp app;
    app.initApp();
    app.getRoot()->startRendering();
    app.closeApp();
    return qapp.exec();
}

[timob256]

this my answer

https://ru.stackoverflow.com/questions/1357826/как-установить-ogre3d-из-исходников-в-линуксе

[8Observer8]

@timob256 but I use Windows

[JoeCFD]

Component Bites is missing. Are you sure you added its lib?

[cpr0gr4mm3r]

I use Ogre 13.6.3 and Qt 5.15.2 MinGW 64-bit and I have the same problem.

Did you get a solution?

[8Observer8]

This post is deleted!

[8Observer8]

This post is deleted!

[8Observer8]

@cpr0gr4mm3r Maybe my next topic will help you: Problems with Ogre in Qt Creator