Code suddenly stops at self.cam = QCamera() , PyQt5.9.2, Qt5.9.3, Python3.5

Xenoshell

@JNBarchan
No worries, i think it should work too and am baffled... Maybe i can summon @Lifetime-Qt-Champion @SGaist ? He has also helped me alot in the past. But i am quite sure it has something to do with the gdb output

SGaist

You can't without lots of chocolate...

Minimal PyQt5 example that shows a viewfinder using the default camera:

import sys

from PyQt5.QtWidgets import QApplication
from PyQt5.QtMultimedia import QCamera, QCameraInfo
from PyQt5.QtMultimediaWidgets import QCameraViewfinder

if __name__ == '__main__':

    app = QApplication(sys.argv)
    camera = QCamera(QCameraInfo.defaultCamera());
    viewfinder = QCameraViewfinder()
    viewfinder.show()
    camera.setViewfinder(viewfinder);
    camera.start()

    sys.exit(app.exec_())

Does it work for you ?

Xenoshell

@SGaist
Nope doesnt work. Its the same thing. Without sudo it doesnt do anything and with sudo it just locks up and i have to login again. I cant find a reason why the raspberry pi just locks up. For me thats the strangest thing to happen. I had my code once on Raspbian but now i am on Ubuntu Mate since i always got a segmentation fault on Raspbian.

JonB

@SGaist
We have established that for the OP QCamera(QCameraInfo.defaultCamera()) --- or indeed QCamera(anything-at-all-or-nothing) --- hangs unless he runs it via sudo. (The only thing I don't think he has clarified is whether QCamera("nosuchcamera".decode()) succeeds returning an invalid camera object or also hangs --- but I suspect the latter.)

What would be nice to know from an expert is: from the Qt source code, what does just a minimal QCamera() constructor actually do? It seems to invoke something in the OS/multimedia --- perhaps something which requires a permission --- but what??

JonB

@Xenoshell
Hmm, have a look at new post which has arrived: https://forum.qt.io/topic/85920/error-running-camera-example/2

This confirms your suspicion that libpulse has something to do with cameras and perhaps QCamera. I don't know what to tell you to do about it, but maybe check what you have installed in that light (libpulse & libpulse-dev)?

Xenoshell

@JNBarchan
I knew it! Sadly installing libpulse-dev did nothing for my problem. Everything stays the same.
Does that mean that maybe my installation of Qt5 or PyQt5 is faulted? I know that i didnt managed to install PyQt5/Qt5 with the QtMultimedia because somehow the command didnt work and i then just used the repository to get qtmultimedia

EDIT: i just checked the groups again and if something strikes my eye. I saw that i am not in the pulse and pulse-access group. I dont think its gonna do anything, though.

JonB

@Xenoshell
Well it's possible (it would only be your Qt installation, not your PyQt). I don't know how you went about it, as I only fetch from Ubuntu repositories (apt-get) for all things Qt, never from Qt themselves. If you're saying you did a "max-and-match" --- some things one way, some another --- you might not have a consistent/correctly located set of libraries. You might want to clarify what you mean by:

i didnt managed to install PyQt5/Qt5 with the QtMultimedia because somehow the command didnt work and i then just used the repository to get qtmultimedia

as anything which "didn't work" in this area could be a clue....

However, this would be implicated if your code always "hung". But the fact that it does work as root but not as you makes one assume that your installation does work.

Deffo think you should post here your problems/try again with anything which "did not work right" during install, especially if it's to do with multimedia....

Xenoshell

@JNBarchan
Well i wanted to install Qt5 from source but in the default installation is not QtMultimedia. So i wanted to use the command to install also QtMultimedia but somehow the command didnt get recognized so i just didnt install QtMulti from source but installed it with a repository. The help command didnt do much for using the correct command, because im quite sure i can read.

JonB

@Xenoshell
Look, I don't know your situation, but maybe it's possible that your multimedia is "out of sync" with the rest of your Qt installed? Like I said, I'm surprised then that it works for root but not other users, but who knows....

Since no-one else seems to be posting to help you on your camera issue, you might want to try a new thread purely about how to correctly install Qt with multimedia under your OS, get it all sorted out properly, and then see if miraculously that solves your problem....

Xenoshell

@JNBarchan
Ok i am gonna do that.

JonB

@Xenoshell

Just so you know, I was @JNBarchan but now I have had a change of identity and I am @JonB!

@Xenoshell has raised the new installation question to (begin to) sort this out at https://forum.qt.io/topic/85955/reinstall-qt5-with-qtmultimedia-using-ubuntu-mate

Xenoshell

@JonB I just tried my code after the installation and somehow it doesnt stop at qcamera anymore, but now the window that pops out is black and i get a bunch of errors in the terminal.

1
2
3
4
5
Venus USB2.0 Camera: Venus USB2
[<PyQt5.QtMultimedia.QCameraInfo object at 0x72ddd3f0>]
/dev/video0
6

(python3:2758): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7\x81\xbb'

(python3:2758): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7Ż'

(python3:2758): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7	\xbc'

(python3:2758): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7M\xbc'
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
7
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
CameraBin error: "Internal data flow error."
CameraBin error: "Internal data flow error."

I dont know if now this is because my installation of qt5 is faulted or something else. Do i have to reinstall PyQt5 too?
@SGaist here is my code again.

import sys
from PyQt5 import QtCore , QtWidgets, QtGui, QtMultimedia, QtMultimediaWidgets
from PyQt5.QtCore import QObject, pyqtSignal, pyqtSlot
from PyQt5.QtWidgets import QApplication, QPushButton, QMainWindow
from PyQt5.QtMultimedia import QCamera, QCameraInfo, QMediaObject, QCameraViewfinderSettings, QCameraImageCapture
from PyQt5.QtMultimediaWidgets import QCameraViewfinder


class Camera(QObject):
    def __init__(self, parent = QObject()):
        super(Camera, self).__init__(parent)
        print("3")
        self.cam = QCamera("/dev/video0".encode())   #QCameraInfo.defaultCamera()
        print("4")
        self.caminfo = QCameraInfo(self.cam)
        self.camvfind = QCameraViewfinder()
        self.camvfindset = QCameraViewfinderSettings()
        self.cammode = self.cam.CaptureMode(0)
        self.camimgcap = QCameraImageCapture(self.cam)

    def iniCamera(self):
        print(self.caminfo.description())
        print(self.caminfo.availableCameras())
        
        for caminfo in QCameraInfo.availableCameras():
            print(caminfo.deviceName())
        
        if self.cam.isCaptureModeSupported(self.cammode):
            print("Capturemode supported")
    
    def startVid(self):
        #self.camimgcap.CaptureDestination(2)
        
        self.camvfind.show()
        
        self.cam.setViewfinder(self.camvfind)
        
        self.cam.setCaptureMode(self.cammode)
        
        self.cam.start()
        
        

if __name__ == '__main__':
    print("1")
    app = QtWidgets.QApplication(sys.argv)
    print("2")
    cam = Camera()
    print("5")
    cam.iniCamera()
    print("6")
    cam.startVid()
    print("7")
    sys.exit(app.exec_())

JonB

@Xenoshell
Well I think that's actually progress!!

Experts will know better than I, but obviously it looks like there are issues which need fixing, which hopefully will then mean you can use the camera OK!

You do not have to do any PyQt re-installs. However, you should ensure that the version of PyQt matches whatever version you have now for Qt. And don't blame me if they don't match, I have a nasty feeling I might have read somewhere that PyQt only goes up to Qt 5.9 at present till the new year. If your Qt is 5.10 we'll have to hope that PyQt 5.9 works sufficiently with it --- you'd have to Google.

But before you look at PyQt, wait for an expert here to explain what your error messages indicate.

P.S.
You say it used to work when run as sudo. Is that still the case now, or same behaviour regardless?

Xenoshell

@JonB i just tested it and sudo doesnt make a difference anymore. I guess thats a good thing. But yeah i dont see a camera feed

Xenoshell

@SGaist @JonB, hello i wish you a happy new year. I am gonna be now more active. SGaist, can you please interpret the newest output i recieved? My screen doesnt lock up anymore and all but i still have a black screen?

Maybe thats a dumb question but do i need a .ui file for all of this to work? Currently i have besides the qt5.py file no other related to all this? I figured that i can add all of the GUI stuff after the code actually works. Am i wrong with that assumption?

Greets

Xeno

Xenoshell

I activated OpenGL for the Raspberry Pi and now the error changed a little bit. It produces actually more errors.
I googled for the vc4_drv_video.so and it solution was to just activate OpenGL which did nothing.

blz@blz-desktop:~/Schreibtisch$ python3 qt5.py
1
2
3

(gst-plugin-scanner:1628): GLib-GObject-WARNING **: cannot register existing type 'ClutterGstVideoSink'

(gst-plugin-scanner:1628): GLib-GObject-CRITICAL **: g_type_add_interface_static: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed

(gst-plugin-scanner:1628): GLib-CRITICAL **: g_once_init_leave: assertion 'result != 0' failed

(gst-plugin-scanner:1628): GStreamer-CRITICAL **: gst_element_register: assertion 'g_type_is_a (type, GST_TYPE_ELEMENT)' failed
4
5
Venus USB2.0 Camera: Venus USB2
[<PyQt5.QtMultimedia.QCameraInfo object at 0x72e273f0>]
/dev/video0
6

(python3:1626): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7\x81\xbb'

(python3:1626): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7Ż'

(python3:1626): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7	\xbc'

(python3:1626): GLib-GObject-WARNING **: g_object_set_valist: object class 'GstVaapiSink' has no property named '0\xff\xf7M\xbc'
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
7
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
CameraBin error: "Internal data flow error."
CameraBin error: "Internal data flow error."

JonB

@Xenoshell

libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1

I assume this is the root of your problems. So does file /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so even exist?

Also, nothing to do with Qt, you're supposed to be able to run command vainfo: https://wiki.archlinux.org/index.php/Hardware_video_acceleration

Xenoshell

@JonB I just looked in the folder and i dont have the file vc4_drv_video.so. I just have vc4_dri.so. Also i didnt have vainfo and after installing vainfo and running the command the output was:

blz@blz-desktop:~$ vainfo
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/arm-linux-gnueabihf/dri/vc4_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit

I looked at the link you attached and i just dont know what do download. I have a ARM CPU because of my raspberry pi. I have no intel cpu or even a gpu. What can i do to fix that problem?

JonB

@Xenoshell
Again, I'm afraid I have no answer to your question. I'm only trying to point you in what I think is the right direction. I note there is a "Raspberry Pi" sub-forum here, I don't know if you'd get more help there, or perhaps on the web.

My point here is: everything you seem to be showing indicates that you have a fundamental problem with your Linux driver situation. Qt in itself does not seem to be relevant. Until you can get through vainfo without it reporting error I presume your camera is not going to work.

From my very limited understanding, VA-API or similar is to do with video hardware acceleration. If you say you "haven't got a GPU", are you supposed to be in this area at all??

I'm wondering whether your whole system is misconfigured. Forget Qt. You have a camera, which I think you said had some installation instructions. Go back to that. Goggle for setting up your camera under Linux, or Raspberry Pi. Go the camera's forum, or perhaps a dedicated Raspberry Pi forum on the web. That's the angle you should be approaching this from.

One thing I've asked you before but don't think you answered: are you able to use that camera at all completely outside of the code you're trying to write in Qt? I assume there must be some generic piece of software that's supposed to work with the camera from, say, System Settings? Like, it should just allow you to enable the camera and perhaps show what it is seeing? I think the Qt angle is like trying to run before you can walk....

Xenoshell

@JonB Yeah i dont expect you to know everything... The camera actually works on a normal camera showing program that was installed with ubuntu mate, so i know the camera is working. I am actually posting on other forums too, the thing is i dont get much info from them either.

Also one question you didnt answer was if i need the .ui file for all of this to work.