How to include .txt on Qt

Payx

QMap<QRgb, CostInfo > Costs = {
	{ QColor(255 , 0 , 0 ).rgb(), { ":/img/fraise.png", 10 }},
	{ QColor(0 , 255 , 0 ).rgb(), { ":/img/balleverte.png", 20 }},	
	{ QColor(0 , 0 , 255 ).rgb(), { ":/img/balebleue.png", 20 }},
	{ QColor(255 , 255 , 255 ).rgb(), { ":/img/balleblanche.png", 20 }},
	{ QColor(255 , 128 , 0 ).rgb(), { ":/img/ballepeche.png", 20 }},
	{ QColor(0 , 0 , 0 ).rgb(), { ":/img/noir.png", 20 }},
	{ QColor(102 , 51 , 0 ).rgb(), { ":/img/marron.png", 20 }},
	{ QColor(255 , 102 , 78 ).rgb(), { ":/img/rose.png", 20 }},
	{ QColor(0 , 204 , 204 ).rgb(), { ":/img/turquoise.png", 20 }},
	{ QColor(255 , 178 , 102 ).rgb(), { ":/img/beige.png", 20 }},
	{ QColor(76 , 0 , 153 ).rgb(), { ":/img/violet.png", 20 }},
	{ QColor(100 , 100 , 100 ).rgb(), { ":/img/gris.png", 20 }},
};

i didnt mention that but i had already changed the path

mrjj

@Payx
oh, it seems correct. You checked they are truly correct?

Please qDebug() << ci.ImageName to verify the variable contains the path from
the table.

just above where you try to make pixmap

qDebug() << "check me--->" << ci.ImageName;
QPixmap pix( ci.ImageName );

Payx

I have

check me---> ""

so there is nothing

i declared as QString ImageName
so maybe it is that ?

mrjj

@Payx
Not sure. check the code that look it up.
If from table it should not be empty :)

SGaist

Are you sure you are retrieving a valid value from your map ?

Payx

No it's sure that it's not a valid value !

QPixmap pix( ci.ImageName );

so it create a pix from a QString no ? that why it didnt work ?

SGaist

From what you wrote before, ci.ImageName is empty, correct ?

If so, check the key that you use to retrieve the data from the map. If not part of the map, depending on the technique used, you will get a default constructed object.

Payx

Yes it's empty.

			foreach( QRgb key, Costs.keys() ) {
				QColor BaseColor( key );
				if (Costs.contains( colour.rgb() ) || IsCloseColor(BaseColor, colour) )  {
					CostInfo& ci = Costs[colour.rgb()];
					QLabel abc;
//          int Cost = ci.Cost;
					qDebug() << "check me--->" << ci.ImageName;
					QPixmap pix( ci.ImageName );
					if (pix.isNull()){
					qDebug() << "yep its no good";
					return;
					};
					QPixmap scaledPix = pix.scaled(   8, 8,
																				 Qt::KeepAspectRatio,
																				 Qt::SmoothTransformation
																				 );
					abc.setPixmap(scaledPix);
					abc.show();

it's what i have.

SGaist

Your logic is flawed. If Costs contains colour.rgb() then you can go on with the rest of your logic else you should go through your map and use IsCloseColor to determine which key is good. Then you can use that key to go further.

Payx

So i have to separate the

colour.rgb() ) || IsCloseColor(BaseColor, colour)

?

can you tell me how can i got through my map i've already search and asked but no one answer

SGaist

You're already doing it with your foreach loop and the documentation of QMap shows several ways of looping through its content.

Payx

something like that ?

			foreach( QRgb key, Costs.keys() ) {
				QColor BaseColor( key );
				if (Costs.contains( colour.rgb() ))  {
					CostInfo& ci = Costs[colour.rgb()];
					QLabel abc;
//          int Cost = ci.Cost;
					qDebug() << "check me--->" << ci.ImageName;
					QPixmap pix( ci.ImageName );
					if (pix.isNull()){
					qDebug() << "yep its no good";
					return;
					};
					QPixmap scaledPix = pix.scaled(   8, 8,
																				 Qt::KeepAspectRatio,
																				 Qt::SmoothTransformation
																				 );
					abc.setPixmap(scaledPix);
					abc.show();

				}
				else {
					if (IsCloseColor(BaseColor, colour) == true){
						CostInfo& ci = Costs[colour.rgb()];
						QColor BaseColor( key );
						QPixmap pix( ci.ImageName );
						QPixmap scaledPix = pix.scaled(   8, 8,
																					 Qt::KeepAspectRatio,
																					 Qt::SmoothTransformation
																					 );
						abc.setPixmap(scaledPix);
						abc.show();
					}
					else {
						qDebug() << "yep its no good";
					}
				}

SGaist

Move the foreach loop in the else part. There's no sense in looping through the whole map if it contains colour.rgb(). Also note that you won't see any QLabel since it's going out of scope.

Payx

void Remplissage(QImage& image, const QPoint& topLeft, const QSize& rectangle, const QColor& colour) {

	int maxX = topLeft.x() + rectangle.width();
	int maxY = topLeft.y() + rectangle.height();

	for(int x = topLeft.x(); x < maxX; ++x) {
		for(int y = topLeft.y(); y < maxY; ++y) {
			image.setPixelColor(x, y, colour);


				QColor BaseColor( key );
				if (Costs.contains( colour.rgb() ))  {
					CostInfo& ci = Costs[colour.rgb()];
					QLabel abc;
//          int Cost = ci.Cost;
					qDebug() << "check me--->" << ci.ImageName;
					QPixmap pix( ci.ImageName );
					if (pix.isNull()){
					qDebug() << "yep its no good";
					return;
					};
					QPixmap scaledPix = pix.scaled(   8, 8,
																				 Qt::KeepAspectRatio,
																				 Qt::SmoothTransformation
																				 );
					abc.setPixmap(scaledPix);
					abc.show();

				}
				else {
					if (IsCloseColor(BaseColor, colour) == true){
						foreach( QRgb key, Costs.keys() ) {
						CostInfo& ci = Costs[colour.rgb()];
						QLabel abc;
						QColor BaseColor( key );
						QPixmap pix( ci.ImageName );
						QPixmap scaledPix = pix.scaled(   8, 8,
																					 Qt::KeepAspectRatio,
																					 Qt::SmoothTransformation
																					 );
						abc.setPixmap(scaledPix);
						abc.show();
					}
					else {
						qDebug() << "yep its no good";
					}
				}

i changed what u said

SGaist

I'd guess it doesn't compile.

Your BaseColor variable doesn't make sense where it's declared. The if (IsCloseColor... also doesn't make sense where you put it. You are searching the map to find which of its key is close to the colour you received. But currently if BaseColor fits you are just trying to show each and every element of Costs.

Again: your QLable objects will be destroyed before they are even shown.

Payx

Yes but i dont want to display one picture so the label is here just for display the picture from my QMap my final picture with all the QMap's image is display in the label_3

sorry but i loose you ^^

the if (IsClose .. doesnt make sense ? i put it after the else because if the bool dont return true we can't continue no?

""BaseColor fits you are just trying to show each and every element of Costs.""
so maybe replace "foreach( QRgb key, Costs.keys() )" by just "foreach(only the image)" can i write ImageName.key ?

Flotisable

@Payx
I think what @SGaist says is that

if Costs contains colour.rgb() you can do what you want
else you should go though the Costs to search if there is a BaseColor that is close to colour
and if there is one, you can do what you want

what you do now is
if Costs contains colour.rgb() you do what you want
else test if BaseColor is close to colour
if it is then you go though the Costs and do what you want

the difference is that
you are not search for a BaseColor that is close to colour( which is a foreach then if )
but test if BaseColor is close to colour and go though the Costs( which is a if then foreach )
and the BaseColor is unknown since there is no key defined before it

Payx

				else {
					if (IsCloseColor(BaseColor, colour) == true){
						foreach( QRgb key, Costs.keys() ) {

its what i did no ?

EDIT : it tell me that key isnt declared in QColor BaseColor( key );

SGaist

No, what you are doing is that if colour is close to base colour you loop on your map.

What you want to do is loop on the map and if any of the colour ÌsCloseColour` then use that one.

As for the build error, look where you declared key and where you are currently using it.

Payx

@SGaist said in How to include .txt on Qt:

What you want to do is loop on the map and if any of the colour ÌsCloseColour` then use that one.

Sorry if i don't understand well but """IsCloseColor(BaseColor, colour) == true""" dont mean that if any of the color IsCloreColour ?