Qt5 development primer

G Offline · wrote on 24 Aug 2012, 16:20

Yeah, unfortunately for me, re-runnng w/git kept failing at different points.

B Offline · wrote on 15 Nov 2012, 02:30

Hi,
I'm new to command line compiling and Git.

Thanks to the excellent "guide":http://qt-project.org/wiki/Building_Qt_5_from_Git I was able to build Qt from source. Now, with the latest beta 2 release, I'd like to update Qt.

My question is simple:

Do I need to run configure after:

git pull
git submodule update --recursive

Or can I just run make again without doing that?

A suggestion would be to update the "Getting Updates" section to include this answer as maybe others would wonder if they need to do that too.

Thanks,
Brett

S Offline · wrote on 15 Nov 2012, 06:29

Tricky. Depends on what has changed in the source code, really. If you have a solid CPU and a bit of time on your hands, you can definitely try just running make, and then if it fails, you should do a proper clean (git clean -dxf, check the link you provided for a submodule declaration), configure and make.

B Offline · wrote on 15 Nov 2012, 06:48

Thanks for your post. I modified the wiki page updates section with a note that clean and configure may need to be re-run.

I Offline · wrote on 27 Nov 2012, 12:28

I'm building on windows 7 x64 with msvc2010 sp1 nmake.

For some reason the naming convention is different then the beta release and incompatible with the vs-addin..

All my lib files, dll files etc are named Qt5[lib].dll/lib instead of Qt[lib]5.dll/lib

My config: configure -developer-build -opensource -nomake examples -nomake tests

L Offline · wrote on 27 Nov 2012, 12:56

See http://lists.qt-project.org/pipermail/development/2012-October/007215.html

C Offline · wrote on 15 Dec 2012, 16:43

Hi,

First I have setup qt5 (both with the linux birnary file and by compiling it) on an Ubuntu 12.04 (and 11.10) KVM virtual machine. But I can't launch any graphical qt program. I have issue with QPainter: that kind of mistakes:

@cedric@cedric-virtual-machine:~/Qt5.0.0beta2/5.0.0-beta2/gcc/bin$ ./assistant
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QPainter::font: Painter not active
QPainter::pen: Painter not active
...@

So I tried on a windows 32 bits virtual machine. First I installed it with the binary but I couldn't find our the right microsoft compiler so it could work. So I tryed to compile it with mingw32-make. It worked with the following config:
@configure -platform win32-g++ -opengl desktop@
Yeah I couldn't find the right version of direct X sdk so I had some issue and choose to use the opengl option.

This version doesn't work with qt creator. I don't know if it is suppoed to? I have an issue with "ABI detection failed. Make sur to use a matching compiler when building. No qml viewer." But I can launch the program named qmlviewer.exe. Also I can compile the following application with qmake.

pro file:
@######################################################################

Automatically generated by qmake (3.0) sam. 15. déc. 15:49:19 2012

######################################################################

QT += widgets
TEMPLATE = app
TARGET = test03withoutCreator
DEPENDPATH += .
INCLUDEPATH += .

Input

SOURCES += main.cpp
@

main.cpp
@#include <QGuiApplication>
#include <QPushButton>

Q_DECL_EXPORT int main(int argc, char *argv[]){
QGuiApplication app(argc, argv);

QPushButton button("work");
button.show();

return app.exec(&#41;;

}@

but then, I have no idea how to launch it. I did:
@qmake
mingw32-make release@
Then I put the binary file in qtbase/bin, but I when I launch the application, I get the following message:
"This application has requested the runtime to terminate it in an unusual way."
But the exemples and demos can be launch without any dll in their direcotry. I don't get how that is possible.

Someone know what I should do so I can compile and launch application?

Sincerly,

Cédric

F Offline · wrote on 19 Dec 2012, 20:15

I'm having trouble building the final release on Windows 7 x64 with both VS2008 and VS2012. I have ActivePerl and Python 2.7 installed and in the path, and in both cases when I run "configure" I get this error:
@
'T:\home\Qt\5.0.0\qtbase\configure.exe' is not recognized as an internal or external command, operable program or batch file.
*** qtbase/configure exited with non-zero status.@

Any ideas?

S Offline · wrote on 20 Dec 2012, 06:42

-You should be running configure.exe on windows, not the bash script.-

Add a file named ".gitignore" to the root folder or comment out line 45 in configure.bat.

J Offline · wrote on 28 Dec 2012, 00:33

After several failed attempts at building, here's how I finally managed to get QT5 to build with Nuwen.net's MinGW 9.4, on Windows 7 64 bit SP1 without webkit.

I already had Nuwen's mingw 9.4 installed (9.5 is now available), this can be obtained from http://www.nuwen.net/mingw.html

This needs to be extracted to c:\mingw or similar, and c:\mingw\bin will need to be in the PATH env variable.

Then I copied c:\mingw\bin\make.exe to c:\mingw\bin\mingw32-make.exe

I then downloaded and installed the following:

http://www.python.org/ftp/python/3.3.0/python-3.3.0.amd64.msi
http://files.rubyforge.vm.bytemark.co.uk/rubyinstaller/rubyinstaller-1.9.3-p362.exe
http://downloads.activestate.com/ActivePerl/releases/5.16.1.1601/ActivePerl-5.16.1.1601-MSWin32-x64-296175.msi
https://msysgit.googlecode.com/files/Git-1.8.0-preview20121022.exe

I used the installers to set the path for python, ruby and perl.

I downloaded QT5 (27th Dec 2012):

git clone git://gitorious.org/qt/qt5.git qt5
cd qt5
perl init-repository

Configured QT5:

configure -developer-build -opensource -nomake examples -nomake tests -qt-pcre -qt-libjpeg -opengl desktop

Configure informed me that webkit would not be built due to a missing dependency, so no additional parameters were required to disable this.
I have an ATi Radeon graphics driver with builtin OpenGL support
By default configure sets pcre to 'system' at one point I downloaded and built the latest version of pcre, including the pcre16 library, I placed this into my system path, but ld was still unable to locate the library and there was no means of passing the -L parameter to ld from what I can tell, build would fail with 'unable to locate pcre16', once you specify -qt-pcre as per the above, the build will use the embedded pcre library and magically succeed.
Again, for me, build would fail without specifying -qt-libjpeg

I then simply ran 'make'

Good luck!

D Offline · wrote on 9 Jan 2013, 16:38

What is the url for the development branch for qt5?
git://gitorious.org/qt/qt5.git does not have modifications since December, and git://gitorious.org/qt/qt.git still contains 4.8

thanks

S Offline · wrote on 9 Jan 2013, 16:41

Every module has a separate git repository, with the exception of QtCore, QtNetwork, QtGui, they are in qtbase.

J Offline · wrote on 9 Jan 2013, 17:20

[quote author="sierdzio" date="1357749703"]Every module has a separate git repository, with the exception of QtCore, QtNetwork, QtGui, they are in qtbase.[/quote]Actually,

qtbase.git contains:

Qt Concurrent
Qt Core
Qt D-Bus
Qt GUI
Qt Network
Qt OpenGL
Qt Print Support
Qt SQL
Qt Test
Qt Widgets
Qt XML

qtdeclarative.git contains:

Qt QML
Qt Quick

S Offline · wrote on 9 Jan 2013, 17:23

Ah, I've been punished for my laziness, thank you for that ;)

Y Offline · wrote on 5 Feb 2013, 15:37

Hi, I've succeed with compiling QT5 for arm (raspberry pi) what is not working for me is localized keyboard input in eglfs. When i use loadkeys de.kmap and than start an application. The keyboard is again Generic (US). But in console localized keyboard works. Did I miss something in compile or programming time?

J Offline · wrote on 6 Feb 2013, 11:59

Hi yeckel,

I don't have any experience with the Raspberry Pi, but I recommend posting your question in the "Qt Project Mobile and Embedded subforum":http://qt-project.org/forums/viewforum/11/ or the "Raspberry Pi forum":http://www.raspberrypi.org/phpBB3/

M Offline · wrote on 25 Feb 2013, 17:51

Hello,

I am trying to compile qt5.0.1 in 32bits mode using msvc2012 on a 64bits machine. I have succesfully build the exactly same sources in 64bits mode, many times.

So I opened a "vs2012-x86 native tools command prompt" and just did exactly the same steps as i did to compile the 64bits version.

After a long time, in the nmake phase, I encountered the following error:

    cd windows\ && ( if not exist Makefile C:\qt5\qt5_32\qtbase\bin\qmake C:

\qt5\qt5_32\qtbase\src\plugins\platforms\windows\windows.pro -o Makefile ) && "C
:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\BIN\nmake.exe" -f Makefile

    "C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\BIN\nmake.exe" -

f Makefile.Debug all

    echo 2 /* CREATEPROCESS_MANIFEST_RESOURCE_ID */ 24 /* RT_MANIFEST */ "..

\..\..\..\plugins\platforms\qwindowsd.dll.embed.manifest">........\plug
ins\platforms\qwindowsd.dll_manifest.rc
if not exist ........\plugins\platforms\qwindowsd.dll del ........
\plugins\platforms\qwindowsd.dll.embed.manifest>NUL 2>&1
if exist ........\plugins\platforms\qwindowsd.dll.embed.manifest copy
/Y ........\plugins\platforms\qwindowsd.dll.embed.manifest ........\plugi
ns\platforms\qwindowsd.dll_manifest.bak
link /NOLOGO /DYNAMICBASE /NXCOMPAT /DEBUG /DLL /MANIFEST /MANIFESTFILE:
........\plugins\platforms\qwindowsd.dll.embed.manifest /OUT:........\plug
ins\platforms\qwindowsd.dll @C:\Users\Philippe\AppData\Local\Temp\nm8E9D.tmp
Creating library ........\plugins\platforms\qwindowsd.lib and object ....
....\plugins\platforms\qwindowsd.exp
dlldata.obj : error LNK2001: unresolved external symbol _Accessible2_ProxyFileIn
fo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleAction_ProxyF
ileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleApplication_P
roxyFileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleComponent_Pro
xyFileInfo
dlldata.obj : error LNK2001: unresolved external symbol AccessibleEditableText
ProxyFileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleHyperlink_Pro
xyFileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleHypertext_Pro
xyFileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleImage_ProxyFi
leInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleRelation_Prox
yFileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleTable_ProxyFi
leInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleTable2_ProxyF
ileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleTableCell_Pro
xyFileInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleText_ProxyFil
eInfo
dlldata.obj : error LNK2001: unresolved external symbol _AccessibleValue_ProxyFi
leInfo
........\plugins\platforms\qwindowsd.dll : fatal error LNK1120: 14 unresolved
externals
NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 11.0
\VC\BIN\link.EXE"' : return code '0x460'
Stop.
NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 11.0
\VC\BIN\nmake.exe"' : return code '0x2'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.[/code]

Any idea what is wrong with my setup?

S Offline · wrote on 25 Mar 2013, 04:48

I am trying to build qt5 on windows. However, I am not even able retrieve the soure code successfully. The inital command "git clone git://gitorious.org/qt/qt5.git qt5" completed successfully. But the next command "perl init-repository" failed with the following error information:

git submodule init
0 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487
AllocationBase 0x0, BaseAddress 0x68560000, RegionSize 0x170000, State 0x10000
c:\program files (x86)\git\bin\sh.exe: *** Couldn't reserve space for cygwin's h
eap, Win32 error 0
git submodule init exited with status 256 at init-repository line 268.
Qt::InitRepository::exe('Qt::InitRepository=HASH(0x32f290)', 'git', 'sub
module', 'init') called at init-repository line 373
Qt::InitRepository::git_submodule_init('Qt::InitRepository=HASH(0x32f290
)') called at init-repository line 569
Qt::InitRepository::run('Qt::InitRepository=HASH(0x32f290)') called at i
nit-repository line 590

I am using msysgit (Git for Windows) 1.8.1.2, Active Perl 5.16.3 and Python 3.3.0.

S Offline · wrote on 25 Mar 2013, 06:15

Run perl from cmd.exe, not Bash terminal.

S Offline · wrote on 25 Mar 2013, 06:36

I did run the command "perl init-repository" from cmd.exe directly.
[quote author="sierdzio" date="1364192137"]Run perl from cmd.exe, not Bash terminal.[/quote]