Static Builds not Working

mrjj

@ed-wright
Hi
Then you have to build a static Qt version.
I have seen static pre-build for Qt Device Creation but im not sure
if they have one for Desktop. (I would ask, it takes quite some time to compile
a full Qt unless your pc is epic)
this is a good start read
https://wiki.qt.io/Build_Standalone_Qt_Application_for_Windows
and also
http://amin-ahmadi.com/2016/09/22/how-to-build-qt-5-7-statically-using-msvc14-microsoft-visual-studio-2015/
but first start with
http://doc.qt.io/qt-5/build-sources.html
and make sure you install all it mentions from
http://doc.qt.io/qt-5/windows-requirements.html
perl, and also python i recall. This is a must do or
it will compile for long time and then fail.
Also, use a good pc. Dual core 1.5 ghz slim laptop will take ages.

ed-wright

@mrjj

Back to your original comment, I manually moved over all the Qt5*.dll from C:\QT\Qt5.10.1\5.10.1\msvc2015_64\bin and then ran windeployqt.exe it now executes.

Changes
It is now the release version
My pro is now changed to uncomment the line "#CONFIG += static"
My C:/QT folder is not currently called this as per your recommendation

mrjj

@ed-wright
Ok, so you successfully made a deployment folder.
Good work. Its also handy to have to check out stuff.

But its not static as that is some more work before thats possible,

ed-wright

@mrjj

I have gone into my Qt account and started downloading qt-everywhere-src-5.10.1.zip, i hope this is the correct download for the static build of Qt. Its Description is, Qt Source Package, Full Framework with Windows style line endings.

mrjj

@ed-wright
Yes, that is the source code. But there is also Qt 5.11
but i assume you been using 5.10.1 ? ( its perfectly fine)
You will then compile a static version from it.
Make sure to reads docs carefully as else it fails and you been wasting hours looking at it compiling.

ed-wright

@mrjj
As im currently using Qt5.10.1 on Qt Creator so i thought i would stick to the same version.

mrjj

@ed-wright
That is fine. Not an issue. just wanted to be clear up front as the
compiling time is not trivial .)

ed-wright

I have been trying to compile the static version of Qt now and have run into a few issues.
Following http://doc.qt.io/qt-5/windows-building.html to try to build the
static version of Qt.

STEP 1
As i use Qt Creator and i have put the License into the prompt this step is
done

STEP 2
I already have a directory called C:\QT\Qt5.10.1, but from the downloads page
in my account i also have downloaded (Qt Source Package, Full Framework with
Windows style line endings ) and it is unpacked and located at C:\QT\qt-
everywhere-src-5.10.1, my project is currently using the first path.

STEP 3
With the environment variables, in my PATH i have
C:\QT\vs2015\qt5.6.1-64\5.6\msvc2015_64\bin, i do not think this is correct as
i want to be using 5.10.1 with msvs2015 so i think it needs to be.
C:\QT\Qt5.10.1\5.10.1\msvc2015_64\bin is this correct?

Anyway, following the guide my file qt5vars.cmd has the following:

REM Set up \Microsoft Visual Studio 14, where <arch> is \c amd64, \c
x86, etc.
CALL "C:\Program Files (x86)\Microsoft Visual Studio
14.0\VC\vcvarsall.bat" amd64
SET _ROOT=C:\QT\qt-everywhere-src-5.10.1
SET PATH=%_ROOT%\qtbase\bin;%_ROOT%\gnuwin32\bin;%PATH%
REM Uncomment the below line when using a git checkout of the source
repository
REM SET PATH=%_ROOT%\qtrepotools\bin;%PATH%
SET _ROOT=

NOTE: i am trying to use the downloaded (Qt Source Package, Full Framework
with Windows style line endings) not the normal 5.10.1 build.

NOTE2: This produces the following when running in the cmd off the shortcut on
the desktop:

C:\WINDOWS>REM Set up \Microsoft Visual Studio 14, where <arch> is \c
amd64, \c
x86, etc.

C:\WINDOWS>CALL "C:\Program Files (x86)\Microsoft Visual Studio
14.0\VC\vcvarsal
l.bat" amd64

STEP 4

Using the Developer Command Prompt for VS2015 i navigate to C:\QT\qt-
everywhere-src-5.10.1

and run the following configure -debug -nomake examples -nomake tests -skip
qtwebengine -opensource

i get the following errors

NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual
Studio 14.0
\VC\BIN\cl.EXE"' : return code '0x2'

ed-wright

@mrjj

Okay an update, Still not working but got a little further.

I have added the line:
set CL=/I"C:\Program Files (x86)\Windows Kits\10\Include\10.0.10240.0\ucrt"

to the file, C:\QT\qt-everywhere-src-5.10.1\configure.bat

it now progresses further BUT now i get this error:

LINK : fatal error LNK1104: cannot open file 'libucrt.lib'
NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\BIN\link.EXE"' : return code '0x450'
Stop.

im trying to find libucrt.lib as we speak

mrjj

Hi
Good work.
I have not seen that one before, but it seems to be related to static linking
https://stackoverflow.com/questions/35805113/visual-studio-2015-run-time-dependencies-or-how-to-get-rid-of-universal-crt

ed-wright

@mrjj

Adding the following to my configure.bat located in the C:\QT\qt-everywhere-src-5.10.1 directory allowed me to overcome this problem.

set INCLUDE=%INCLUDE%;C:\Program Files (x86)\Windows Kits\10\Include\10.0.10240.0\ucrt
set LIB=%LIB%;C:\Program Files (x86)\Windows Kits\10\lib\10.0.10240.0\ucrt\x86

Onto the next issue now.

I have successfully run the command

configure -debug -nomake examples -nomake tests -skip qtwebengine -opensource -static

The next part of the guide states that the following command should be run.

nmake

Once running it went for a few minutes and then produced the following error

Microsoft (R) Program Maintenance Utility Version 14.00.24210.0
Copyright (C) Microsoft Corporation.  All rights reserved.

        cl -c -nologo -Zc:wchar_t -FS -Zc:strictStrings -Zi -MDd -utf-8 -W0 /Fd..\..\..\lib\qtpcre2d.pdb -DUNICODE -D_UNICODE -DWIN32 -DPCRE2_CODE_UNIT_WIDTH=16 -DPCRE2_STATIC -DQT_NO_NARROWING_CONVER
SIONS_IN_CONNECT -DHAVE_CONFIG_H -DQT_NO_DYNAMIC_CAST -DQT_NO_EXCEPTIONS -I. -Isrc -I..\..\..\mkspecs\win32-msvc -Fo.obj\debug\ @C:\Users\T0187208\AppData\Local\Temp\nmF7A.tmp
pcre2_auto_possess.c
pcre2_chartables.c
pcre2_compile.c
pcre2_config.c
pcre2_context.c
pcre2_dfa_match.c
pcre2_error.c
pcre2_find_bracket.c
pcre2_jit_compile.c
pcre2_maketables.c
pcre2_match.c
pcre2_match_data.c
pcre2_newline.c
pcre2_ord2utf.c
pcre2_pattern_info.c
pcre2_serialize.c
pcre2_string_utils.c
pcre2_study.c
pcre2_substitute.c
pcre2_substring.c
Generating Code...
Compiling...
pcre2_tables.c
pcre2_ucd.c
pcre2_valid_utf.c
pcre2_xclass.c
Generating Code...
        lib /NOLOGO  /OUT:..\..\..\lib\qtpcre2d.lib @C:\Users\T0187208\AppData\Local\Temp\nm1B7D.tmp
        cd corelib\ && ( if not exist Makefile C:\QT\qt-everywhere-src-5.10.1\qtbase\bin\qmake.exe -o Makefile C:\QT\qt-everywhere-src-5.10.1\qtbase\src\corelib\corelib.pro ) && "C:\Program Files (x86
)\Microsoft Visual Studio 14.0\VC\BIN\nmake.exe" -f Makefile
ASSERT: "isAbsolutePath(baseDir)" in file C:\QT\qt-everywhere-src-5.10.1\qtbase\qmake\library\ioutils.cpp, line 106
NMAKE : fatal error U1077: 'cd' : return code '0x3'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.
NMAKE : fatal error U1077: 'cd' : return code '0x2'
Stop.

This is omitting some of the previous command line output that all worked correctly, this is where it crashed.

Do you have any idea?

ed-wright

So part of the problem was that my default prefix for the configure command was incorrect.

So going back and running the following worked.

configure -debug -nomake examples -nomake tests -skip qtwebengine -opensource -static -prefix C:\QT\qt-everywhere-src-5.10.1 -redo -recheck-all

Then to Build

nmake

mrjj

Super good work.
Thanks for updating on the way. will be helpful for others.