Cannot load from SD card created with Boot to Qt tool on Colibri iMX6

[NatalieS]

Greetings,
I followed procedure listed in http://doc.qt.io/QtEnterpriseEmbedded/qtee-
preparing-hardware-colibri-imx6.html to prepare Toradex Colibri iMX6 board to
load Qt application 5.7. I was able to create an SD card with uImage and
u-boot image ,flash_mmc.img, flash_blk.img and 2 dtb files. But was not able
to load from SD card.
I issued commands:
run setupdate
run update_uboot
then after rebooting my board, following commands were ran
env default -a
saveenv

And after rebooting one more time with SD card inserted, it did not load new
kernel from SD card.

Will you please help me to see what step I missed or did not execute
correctly.

Thank you very much for your help.
Natalie

[SGaist]

Hi and welcome to devnet,

Boot2Qt being a licensed product, I'd recommend contacting the Qt Company directly to help with that matter. AFAIK, Toradex's customer service is also pretty good so you might also consider contacting them.

[tomasz3dk]

@SGaist From a couple of days it is also opensourced as descibed in blog.

[NatalieS]

Thank you so much for your recommendation! I will follow up with them.