Recurring C++ and Qt anti-patterns

ODБOï

@aha_1980 said in Recurring C++ and Qt anti-patterns:

Can you think of an example where you still want to use that pointer afterwards?

not a real world application

fcarney

@fcarney said in Recurring C++ and Qt anti-patterns:

deleting thousands of pointers and there might actually be overhead

I cannot actually tell if the overhead in this code is the indexing of the array, or if the movement of data is significant. I tried doing a dummy no op index, but I am guessing it is being optimized out:

#include <QCoreApplication>
#include <QElapsedTimer>
#include <QDebug>

#define MEM_SEG_LEN 8
#define MEM_SEGS 100000000

char** createMemoryList(){
    char** list = new char*[MEM_SEGS];
    for(int index=0; index<MEM_SEGS; index++){
        list[index]=new char[MEM_SEG_LEN];
    }

    return list;
}

void deleteMemoryList(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        delete list[index];
        list[index]; // can you force an index to occur?
    }
    delete list;
}

void deleteMemoryListNull(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        delete list[index];
        list[index] = nullptr;
    }
    delete list;
    list = nullptr;
}

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    QElapsedTimer timer1;

    char** list1 = createMemoryList();
    timer1.start();
    deleteMemoryList(list1);
    qInfo() << timer1.elapsed();

    QElapsedTimer timer2;

    char** list2 = createMemoryList();
    timer2.start();
    deleteMemoryListNull(list2);
    qInfo() << timer2.elapsed();

    return a.exec();
}

I get the following output:

813
1301

I doubt that is the overhead of the movement of null into the pointer. My guess is the the index overhead is in there too.

fcarney

I eliminated the extra index (probably compiler already did this before):

void deleteMemoryList(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        char* tmp = list[index];
        delete tmp;
    }
    delete list;
}

void deleteMemoryListNull(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        char* tmp = list[index];
        delete tmp;
        tmp = nullptr;
    }
    delete list;
    list = nullptr;
}

Results:

877
1369

Edit: Real world usage? I really highly doubt it. That is a LOT of iterations of delete. So I would say the extra cycles are negligible.

Edit2:
Pointer math:

void deleteMemoryList(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        char** tmp = &(list[index]);
        delete *tmp;
    }
    delete list;
}

void deleteMemoryListNull(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        char** tmp = &(list[index]);
        delete *tmp;
        *tmp = nullptr;
    }
    delete list;
    list = nullptr;
}

Results:

853
1307

Sometimes apples and apples is hard.

JonB

@fcarney
Since this is the lounge... Surprised by your findings (in earlier examples). What exactly is the difference in the assembly between the two versions? What is being generated for your tmp = nullptr;? (Not the later *tmp = nullptr;, that's different.)

fcarney

@JonB said in Recurring C++ and Qt anti-patterns:

tmp = nullptr;

I changed it to not update a local variable. char* tmp is local, so setting it to null is just setting a local variable to null. So it was setting the wrong area of memory to null. That is why I took the address of where that pointer is stored.

The assembler for tmp = nullptr in previous incarnation:

movq   $0x0,-0x8(%rbp)

The assembler for *tmp = nullptr in latest incarnation:

mov    -0x8(%rbp),%rax
movq   $0x0,(%rax)

But you are right, the tmp = nullptr is more representative.
The timing is not much different.

fcarney

Okay, I think I am done, but here is my last incarnation:

#include <QCoreApplication>
#include <QElapsedTimer>
#include <QDebug>

#define MEM_SEG_LEN 8
#define MEM_SEGS 100000000 // 846 1315 // assignment
#define MEM_SEGS 100000000 // 885 1349 // correct assignment
//#define MEM_SEGS 100

char** createMemoryList(){
    char** list = new char*[MEM_SEGS];
    for(int index=0; index<MEM_SEGS; index++){
        list[index]=new char[MEM_SEG_LEN];
    }

    return list;
}

void deleteMemoryList(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        char** tmp = &(list[index]);
        delete *tmp;
    }
    delete list;
}

void deleteMemoryListNull(char** list){
    for(int index=0; index<MEM_SEGS; index++){
        char** tmp = &(list[index]);
        delete *tmp;
        *tmp = nullptr;
//        char* tmp = (list[index]);
//        delete tmp;
//        tmp = nullptr;
    }
    delete list;
    list = nullptr;
}

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    double time1, time2;

    qInfo() << QString(R"(Starting memory test 1 of not setting pointer to nullptr: %1 cycles)").arg(MEM_SEGS);

    QElapsedTimer timer1;

    char** list1 = createMemoryList();
    timer1.start();
    deleteMemoryList(list1);
    time1 = timer1.elapsed();
    qInfo() << time1/1000.0 << QString().number((time1/1000.0)/double(MEM_SEGS),10,12);

    qInfo() << QString(R"(Starting memory test 2 of setting pointer to nullptr: %1 cycles)").arg(MEM_SEGS);

    QElapsedTimer timer2;

    char** list2 = createMemoryList();
    timer2.start();
    deleteMemoryListNull(list2);
    time2 = timer2.elapsed();
    qInfo() << time2/1000.0 << QString().number((time2/1000.0)/double(MEM_SEGS),10,12);

    qInfo() << "Difference:" << QString().number((time2/1000.0)/double(MEM_SEGS)-(time1/1000.0)/double(MEM_SEGS),10,12);

    return a.exec();
}

So, 5 nanoseconds difference for a delete operation of dereffed pointer assignment:

"Starting memory test 1 of not setting pointer to nullptr: 100000000 cycles"
0.848 "0.000000008480"
"Starting memory test 2 of setting pointer to nullptr: 100000000 cycles"
1.321 "0.000000013210"
Difference: "0.000000004730"

Edit:
Math was wrong.

JonB

@fcarney
You're talking about a single movq. Just how big is MEM_SEGS? Your timings, are they in milliseconds?? And I assume list is filled with zeroes? I'm talking about your earlier barebones example, where your timings were
877
1369

Oh now I see more code in other examples. If your list contained 10 million news and you are deleteing them, common-sense should tell you the cost of whether or not you set one local variable to nullptr with just a mov instruction must be negligible, compared to whatever is involved in freeing memory, no?

fcarney

@JonB said in Recurring C++ and Qt anti-patterns:

one local variable to nullptr with just a mov instruction must be negligible, compared to whatever is involved in freeing memory, no?

Correct. My math was wrong. It is 5 nanoseconds. At least for dereffed pointer, but timing was nearly the same for local variable as well.

JonB

@fcarney
Ahhh, that would make much more sense! :)
A nanosecond doesn't sound too long, I don't think I could get much done in it could I?

aha_1980

One more example for the hall of shame:

QByteArray ba = "Hello World";
QString s = QString::fromStdString(ba.toStdString());

We have two problems here:

The conversion to and from std::string is unneeded
This only works for ASCII characters. QString::fromUtf8(ba); would most often be the correct choice, sometimes also QString::fromLocal8Bit(ba);

aha_1980

One more note to string processing:

QString empty = ""; is not the correct way to create an empty string, that is QString empty;

To clear an non-empty QString data, use data.clear() instead data = "";.

The same applies to QByteArrays.

fcarney

@aha_1980 said in Recurring C++ and Qt anti-patterns:

QString empty = ""; is not the correct way to create an empty string, that is QString empty;
To clear an non-empty QString data, use data.clear() instead data = "";

Interesting... I did a couple of tests to see if it behaves the same way for comparisons. The only difference I can find between clear and setting to "" is the isNull test:

    qInfo() << "string test";
    QString empty;
    QString str = "";
    qInfo() << bool(empty == str);
    qInfo() << str.isNull();
    str.clear();
    qInfo() << bool(empty == str);
    qInfo() << str.isNull();

output:

string test
true
false
true
true

If the string was set to "" is returns false for isNull. I have never had the occasion to use this test and am not sure what it is for. I guess it would be important if you want to determine if an empty string was assigned to the variable versus nothing being assigned.

aha_1980

@fcarney I just think the isNull() method should be deprecated. Even the documentation states:

Qt makes a distinction between null strings and empty strings for historical reasons. For most applications, what matters is whether or not a string contains any data, and this can be determined using the isEmpty() function.

Christian Ehrlicher

@fcarney said in Recurring C++ and Qt anti-patterns:

Why doesn't delete set the pointer to null then?

Because the operator delete is defined to take a pointer, not a reference to a pointer.
https://en.cppreference.com/w/cpp/memory/new/operator_delete

fcarney

Welcome to another edition of Is this an Anti-Pattern?

Harmless looking pattern 1:

std::vector<int64_t> list = {9,9,9,9,9,9,9,9,9,9};
int64_t sum = std::accumulate(list.begin(), list.end(), 0);

Harmless looking pattern 2:

std::vector<int64_t> list = {9,9,9,9,9,9,9,9,9,9};
int64_t prod = std::accumulate(list.begin(), list.end(), 1, std::multiplies<int64_t>());

Lack of understanding pattern 3:

std::set<int> list = {9,8,7,6};
int last = *(list.end()--);

Lack of understanding pattern 4:

std:vector<int> list = {9,8,7,6};
int last = *(list.end()--);

~~I still don't get why this cannot be done for sets and vectors...~~
Okay, was using post decrement instead of a prefix decrement. DOH!

int last = *(--list.end());

Logic fudgery pattern 5 (this is more an optical illusion, it was to me anyway):

bool is_leap_year(int year){
    return (year % 4 == 0) && (year % 100 == 0) ? (year % 400 == 0) : true;
}

sierdzio

Small things from me:

lack of const in signal declarations. A signal will never modify an object so it can always be const. Qt will const_cast it away anyway, but it enables you to emit signals from const methods and (possibly) compiler to optimize a bit more
overuse of lambdas in slot connections even when a normal slot just makes more sense

Asperamanca

@sierdzio said in Recurring C++ and Qt anti-patterns:

Small things from me:

lack of const in signal declarations. A signal will never modify an object so it can always be const. Qt will const_cast it away anyway, but it enables you to emit signals from const methods and (possibly) compiler to optimize a bit more

overuse of lambdas in slot connections even when a normal slot just makes more sense

This brings me to a philosophical question: Do I want to be able to emit a signal from a const method, although the slot(s) attached to the signal may well modify data the originating const method could not itself modify?

sierdzio

@Asperamanca said in Recurring C++ and Qt anti-patterns:

This brings me to a philosophical question: Do I want to be able to emit a signal from a const method, although the slot(s) attached to the signal may well modify data the originating const method could not itself modify?

Yes, it's very debatable :D I did find a few occasions where it was useful (latest example: modifying behaviour of QTreeView without patching Qt - I have emitted a signal from const overloaded method and did my modifications there), but I agree it does not feel "right".

fcarney

Given the code:
modules.h

#ifndef MODULES_H
#define MODULES_H

#include <string>

void reg_module(int type, std::string name, int initedValue);

#endif // MODULES_H

modules.cpp

#include "modules.h"

using namespace std;

struct Modules
{
    Modules(): m_initedValue(0){}
    int m_type;
    string m_name;
    int m_initedValue;
} global_modules_struct[128];

void reg_module(int type, std::string name, int initedValue){
    global_modules_struct[type].m_type = type;
    global_modules_struct[type].m_name = name;
    global_modules_struct[type].m_initedValue = initedValue;
}

moduletype.h

#ifndef MODULETYPE_H
#define MODULETYPE_H

// nothing here

#endif // MODULETYPE_H

moduletype.cpp

#include "moduletype.h"
#include "modules.h"

struct SomeModule{
    SomeModule(){
        reg_module(10, "some type", 5);
    }
} SomeModuleInstance;

Ignore obvious indexing bounds checking issues for the array itself. Also ignore external array indexing possibly being out of bounds.

I just ran into a form of this problem in our code and it did not exhibit issues in Linux (that we know of) and did show issues in Windows. Linux used gcc and Windows used mingw. Same version of Qt 5.12.2 etc. Once identified it was really easy to see why this is a big issue.

Edit:
Technically global_modules_struct is not really global either. So ignore the misleading name.

Chris Kawa

I had to dig through this thing once, only the real code was like a hundred times longer and more convoluted.

// Library.h statically linked to and included in DLL and EXE
struct SomeType
{
   int typeId();
};
Q_DECLARE_METATYPE(SomeType);

// Library.cpp
int SomeType::typeId()
{
    return qMetaTypeId<SomeType>();
}

// main app
SomeType& var1 = getItFromDLL();
SomeType& var2 = getItFromEXE();

bool same = var1.typeId() == var2.typeId(); // nope

Pretty ugly thing to debug, especially since once in blue moon it actually works :/