TexMaker F1 Problem After Qt6 Install
-
@SGaist I had a working version of TexMaker and after I installed Qt6, the F1 key did not work. My statement is that I had seen stating that TexMaker was base on Qt5.
For TexMaker I downloaded texmaker_5.0.4_ubuntu_20_10_amd64.deb and ran it.
For Qt6 I ran the open source version of qt-unified-linux-x64-4.0.1-1-online.run.I am looking for the site were Qt5 is mentioned as the base for Texaamaker, I will post it when I find it.
-
What you do not explain is how you installed TexMaker, nor Qt 6.
Qt 5 and Qt 6 have explicit different so version so there's no risk for an application to pick the wrong major release by accident.
-
I currently do wonder how an isolated installation of Qt 6 might interfere with TexMaker.
Can you run ldd on the TexMaker binary ?
-
I currently do wonder how an isolated installation of Qt 6 might interfere with TexMaker.
Can you run ldd on the TexMaker binary ?
@SGaist Is this swhat you want:
ob@bob-linux:/bin$ ldd texmaker
linux-vdso.so.1 (0x00007fffae5bf000)
libQt5PrintSupport.so.5 => /lib/x86_64-linux-gnu/libQt5PrintSupport.so.5 (0x00007ff8460b0000)
libQt5Widgets.so.5 => /lib/x86_64-linux-gnu/libQt5Widgets.so.5 (0x00007ff845a15000)
libQt5Gui.so.5 => /lib/x86_64-linux-gnu/libQt5Gui.so.5 (0x00007ff84542a000)
libQt5Xml.so.5 => /lib/x86_64-linux-gnu/libQt5Xml.so.5 (0x00007ff8453e8000)
libQt5Network.so.5 => /lib/x86_64-linux-gnu/libQt5Network.so.5 (0x00007ff845227000)
libQt5Script.so.5 => /lib/x86_64-linux-gnu/libQt5Script.so.5 (0x00007ff844f7b000)
libQt5Core.so.5 => /lib/x86_64-linux-gnu/libQt5Core.so.5 (0x00007ff844a30000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007ff844a0d000)
libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007ff84482c000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007ff8446dd000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007ff8444eb000)
libGL.so.1 => /lib/x86_64-linux-gnu/libGL.so.1 (0x00007ff844463000)
libpng16.so.16 => /lib/x86_64-linux-gnu/libpng16.so.16 (0x00007ff844429000)
libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007ff84440d000)
libharfbuzz.so.0 => /lib/x86_64-linux-gnu/libharfbuzz.so.0 (0x00007ff844308000)
libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007ff8442ed000)
libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007ff8442e7000)
libicui18n.so.66 => /lib/x86_64-linux-gnu/libicui18n.so.66 (0x00007ff843fe6000)
libicuuc.so.66 => /lib/x86_64-linux-gnu/libicuuc.so.66 (0x00007ff843e00000)
libpcre2-16.so.0 => /lib/x86_64-linux-gnu/libpcre2-16.so.0 (0x00007ff843d7d000)
libdouble-conversion.so.3 => /lib/x86_64-linux-gnu/libdouble-conversion.so.3 (0x00007ff843d67000)
libglib-2.0.so.0 => /lib/x86_64-linux-gnu/libglib-2.0.so.0 (0x00007ff843c3e000)
/lib64/ld-linux-x86-64.so.2 (0x00007ff846b39000)
libGLdispatch.so.0 => /lib/x86_64-linux-gnu/libGLdispatch.so.0 (0x00007ff843b86000)
libGLX.so.0 => /lib/x86_64-linux-gnu/libGLX.so.0 (0x00007ff843b50000)
libfreetype.so.6 => /lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007ff843a91000)
libgraphite2.so.3 => /lib/x86_64-linux-gnu/libgraphite2.so.3 (0x00007ff843a64000)
libicudata.so.66 => /lib/x86_64-linux-gnu/libicudata.so.66 (0x00007ff841fa3000)
libpcre.so.3 => /lib/x86_64-linux-gnu/libpcre.so.3 (0x00007ff841f30000)
libX11.so.6 => /lib/x86_64-linux-gnu/libX11.so.6 (0x00007ff841df1000)
libxcb.so.1 => /lib/x86_64-linux-gnu/libxcb.so.1 (0x00007ff841dc7000)
libXau.so.6 => /lib/x86_64-linux-gnu/libXau.so.6 (0x00007ff841dc1000)
libXdmcp.so.6 => /lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007ff841db9000)
libbsd.so.0 => /lib/x86_64-linux-gnu/libbsd.so.0 (0x00007ff841d9f000) -
That's what I was suspecting nothing related to Qt 6.
Did you try to run TexMaker from the command line to see if you have any log messages about what is going on ?
-
That's what I was suspecting nothing related to Qt 6.
Did you try to run TexMaker from the command line to see if you have any log messages about what is going on ?
-
@SGaist From the terminal I get:
bob@bob-linux:~$ cd /bin
bob@bob-linux:/bin$ texmaker
qt5ct: using qt5ct plugin
Gtk-Message: 16:21:11.851: Failed to load module "xapp-gtk3-module" -
Do you get it to work again if you remove Qt 6 ?
-
Looks like it's unrelated to Qt 6 then.
Did you try to check if there's a log or something generated by TexMaker ? Did you try to start it from the command line ?
-
Looks like it's unrelated to Qt 6 then.
Did you try to check if there's a log or something generated by TexMaker ? Did you try to start it from the command line ?
@SGaist The log for TexMaker when I press F1:
LOG FILE :
This is pdfTeX, Version 3.14159265-2.6-1.40.16 (TeX Live 2015/Debian) (preloaded format=pdflatex 2017.2.4) 11 OCT 2020 11:58
entering extended mode
restricted \write18 enabled.
%&-line parsing enabled.
**Print2DGraphics.tex
(./Print2DGraphics.tex
LaTeX2e <2016/02/01>
Babel <3.9q> and hyphenation patterns for 81 language(s) loaded.
(/usr/share/texlive/texmf-dist/tex/latex/base/book.cls
Document Class: book 2014/09/29 v1.4h Standard LaTeX document class
(/usr/share/texlive/texmf-dist/tex/latex/base/bk12.clo
File: bk12.clo 2014/09/29 v1.4h Standard LaTeX file (size option)
*********Middle Part of File Deleted because it was too big.
They are messages about formatting the document.\makeMPintoPDFobject=\count166
\everyMPtoPDFconversion=\toks48
) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO
)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
Package pdftexcmds Info: \pdfdraftmode found.
)
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
Package: epstopdf-base 2010/02/09 v2.5 Base part for package epstopdf
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty
Package: grfext 2010/08/19 v1.1 Manage graphics extensions (HO)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvdefinekeys.sty
Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO)
))63 words of extra memory for PDF output out of 10000 (max. 10000000)
It seems to indicate that the pdf file was written, but I checked and it was not. I hope it helps.
-
@ofmrew said in TexMaker F1 Problem After Qt6 Install:
Package ifluatex Info: LuaTeX not detected.
I don't know if it's related but worth a check.
-
@ofmrew said in TexMaker F1 Problem After Qt6 Install:
Package ifluatex Info: LuaTeX not detected.
I don't know if it's related but worth a check.
-
Did you re-install TexMaker ?
-
After removing Qt 6 ?
-
@SGaist I removed Qt6 and reinstalled it, then I uninstalled TexMaker and reinstalled it. Same problem, note that this is on win 10. Win 10 also has qt5 installed. I have not tried it on Mint Linux.
The question now is should I remove TexMaker and all versions of qt, the try TexMaker with no qt installed?
-
@SGaist I removed Qt6 and reinstalled it, then I uninstalled TexMaker and reinstalled it. Same problem, note that this is on win 10. Win 10 also has qt5 installed. I have not tried it on Mint Linux.
The question now is should I remove TexMaker and all versions of qt, the try TexMaker with no qt installed?
@ofmrew said in TexMaker F1 Problem After Qt6 Install:
The question now is should I remove TexMaker and all versions of qt, the try TexMaker with no qt installed?
That was the idea, yes.
-
@ofmrew said in TexMaker F1 Problem After Qt6 Install:
The question now is should I remove TexMaker and all versions of qt, the try TexMaker with no qt installed?
That was the idea, yes.
@SGaist I am getting back to this problem; however, to do so will mean that I will need to remove Qt and the Qt3D that I painfully installed. I would like to move Ninja and Vulkan so that I will not need to build them, also. I would like to save conan3D which was the conan build directory, but will that not work when I reinstall Qt6? Any advise? I wish there was a workaround to this TexMaker problem.
