Sending curl command to command prompt using QProcess

Ahsan Niaz

i want to send the command to the command prompt using QProcess
When i send the command to the command prompt it doesn't run perfectly, but when i paste my command on the command prompt manually, it works perfectly.

Christian Ehrlicher

Then do what we suggest - add your parameters to a QStringList, pass it to QProcess. And no I won't show you the code, you can show us yours.

Ahsan Niaz

This is what I have done to create a command and send it to the command prompt

char * final = "curl -X POST https://content.dropboxapi.com/2/files/upload --header \"Authorization: Bearer access_token\" --header \"Dropbox-API-Arg: {\\\"path\\\": \\\"/Orders/";
            s.replace(" ",""); //s has todays date
            QByteArray ba = s.toLocal8Bit();
            char *c_str2 = ba.data();
            char *three = new char[strlen(final) + strlen(c_str2) + 1];
            strcpy(three, final);
            strcat(three, c_str2);
            final = three;
            char * name = "/United_Plof.CSV\\\"}\" --header \"Content-Type: application/octet-stream\" --data-binary @";
            char * four = new char[strlen(final) + strlen(name) + 1];
            strcpy(four, final);
            strcat(four, name);
            final = four;
            ba = united_plof.toLocal8Bit();
            char * c_str3 = ba.data();
            char *five = new char[strlen(final) + strlen(c_str3) + 1];
            strcpy(five, final);
            strcat(five, c_str3);
            //final = final + auth;
            final = five;
            qDebug() << final;
            QProcess mproc;
            mproc.start(final);


            mproc.waitForFinished();
             qDebug() <<  mproc.errorString();
            QByteArray output = mproc.readAll();
            qDebug().noquote() << output;

The (final) command that appears in output is

curl -X POST https://content.dropboxapi.com/2/files/upload --header "Authorization: Bearer access_token" --header "Dropbox-API-Arg: {\"path\": \"/Orders/SatNov142020/United_Plof.CSV\"}" --header "Content-Type: application/octet-stream" --data-binary @C:/Users/U/Dropbox/order/United/2020_Sep_06_06_29_29__CSPROD_N.CSV

I have sent this command to Qprocess.start, but it gave me the following error

Error in call to API function "files/upload": HTTP header "Dropbox-API-Arg": could not decode input as JSON

To verify that my command is right, i copied the curl command from output and executed it in the command prompt manually, it worked fine.
I hope i am being very clear here.

JonB

@Ahsan-Niaz said in Sending curl command to command prompt using QProcess:

and send it to the command prompt

You're not sending it "to the command prompt".

You are passing a single string to QProcess::start() overload, which either has already been deprecated/removed or soon will be, apparently. So we are being instructed to move away from asking Qt QProcess::start() to execute a string, which relies on its argument-splitting, and rather to pass separate arguments explicitly.

Your issue may or may not lie in this. I would have stuck with your original question

Can you help me in defining the arguments for the following command?

and just split up your string into the necessary, separate QStringList() arguments to be passed to void QProcess::start(const QString &program, const QStringList &arguments, QIODevice::OpenMode mode = ReadWrite). This si what @SGaist & @Christian-Ehrlicher were also recommending. It would be a lot cleaner than all your strcpy() stuff. It may reveal why there is a problem with the Dropbox-API-Arg argument.

Untested, but the items to construct the QStringList from C++ code looks to me like they will be:

"-X"
"POST"
"https://content.dropboxapi.com/2/files/upload"
"--header"
"Authorization: Bearer access_token"
"--header"
"Dropbox-API-Arg: {\"path\": \"/Orders/FriNov132020/United_Plof.CSV\"}"
"--header"
"Content-Type:application/octet-stream"
"--data-binary"
"@C:/Users/U/Dropbox/order/United/2020_Sep_06_06_29_29__CSPROD_N.CSV"

Ahsan Niaz

@JonB Hi, I tried to do what you have suggested

QStringList arg;
            arg << "-X" << "https://content.dropboxapi.com/2/files/upload" << "--header" << "Authorization: Bearer access_token" << "--header" << fourr << "--header" <<"Content-Type:application/octet-stream"<<"--data-binary"<<fivee;
            qDebug() << arg;
            mproc.start("curl",arg);


            mproc.waitForFinished();
            QByteArray output = mproc.readAll();
            
              qDebug().noquote() << output;             
             //four = "Dropbox-API-Arg: {\"path\": \"/Orders/SatNov142020/United_Plof.CSV\\\"}\""
             // five = @C:/Users/U/Dropbox/order/United/2020_Sep_07_06_12_25__CSPROD_N.CSV"

I received nothing, no output,

Christian Ehrlicher

QProcess has waitForStart() with a return value, exitCode() and exitStatus() and some more which you should check.

Ahsan Niaz

@Christian-Ehrlicher exitcode returns (2)
and exitStatus returns QProcess::NormalExit

Christian Ehrlicher

So you should check what this return code tells you - man curl.
Can you show us how you initialize 'four' ? The debug output doesn't look correct due to the quoted "
You also forgot the second argument.

Ahsan Niaz

this is how i get (four)

char * x = "Dropbox-API-Arg: {\"path\": \"/Orders/";
            ba = s.toLocal8Bit();    //s has todays date
            char *c_str6 = ba.data();
            char *threee = new char[strlen(x) + strlen(c_str6) + 1];
            strcpy(threee, x);
            strcat(threee, c_str6);
            name = "/United_Plof.CSV\\\"}\"";
            char * fourr = new char[strlen(threee) + strlen(name) + 1];
            strcpy(fourr, threee);
            strcat(fourr, name);

Do you want me to check (man curl) in qprocess.start?
the only thing I wanted is to execute a command on a terminal or command prompt. the command is generated in qt code.

JonB

@Ahsan-Niaz said in Sending curl command to command prompt using QProcess:

//four = "Dropbox-API-Arg: {\"path\": \"/Orders/SatNov142020/United_Plof.CSV\\\"}\""

This at least looks wrong. You should be trying to get the fundamentals right: walk before you can run.

Do it with literal-strings first. I did that from the strings you showed me earlier. Putting in variables right now is error-prone. When you have the simplest example working correctly is the time to introduce those.
If you want to know how your QProcess code is sending the final arguments, write a one-line C/C++ program to just print out received argv contents, and use that as your curl command.

Ahsan Niaz

@JonB
I did it in literal strings as well with the following piece of code

QStringList arg;
            arg << "-X" << "https://content.dropboxapi.com/2/files/upload" << "--header" << "Authorization: Bearer access_token" << "--header" << "Dropbox-API-Arg: {\"path\": \"/Orders/FriNov132020/United_Plof.CSV\"}" << "--header" <<"Content-Type:application/octet-stream"<<"--data-binary"<<"@C:/Users/U/Dropbox/order/United/2020_Sep_06_06_29_29__CSPROD_N.CSV";
            qDebug() << arg;
            mproc.start("curl",arg);
            mproc.waitForStarted();

            mproc.waitForFinished();
             qDebug() <<  mproc.exitStatus();
            QByteArray output = mproc.readAll();
            qDebug().noquote() << output;

Still nothing in the output.

Bonnie

@Ahsan-Niaz
I think you forgot your "POST".

And about the obsolete start(command) function, it now uses QProcess::splitCommand to get arguments from the command.
I use that to print your command and it seems to get a little messy by getting:

Dropbox-API-Arg: {\path\: \/Orders/SatNov142020/United_Plof.CSV\}

So I look into the source code of splitCommand and I find this comment:

// handle quoting. tokens can be surrounded by double quotes
// "hello world". three consecutive double quotes represent
// the quote character itself.

So instead of \", you need """ to represent the quote character inside double quotes.
So I think \\\" should be changed to \"\"\" if you use the obsolete function.
Note1: I'm not encouraging using the obsolete function.
Note2: Hide your access token...

Christian Ehrlicher

@Bonnie said in Sending curl command to command prompt using QProcess:

@Ahsan-Niaz
I think you forgot your "POST".

You also forgot the second argument.

He does not read the comments so what do you expect?

Ahsan Niaz

I am really thankful to everyone who replied to me and corrected my mistakes. Your help will help me finish my work quicker.
Thanks @Christian-Ehrlicher , @Bonnie @JonB