Make a frameless QWidget resizable with QRubberBand ?

[mrjj]

@IMAN4K

• and i think eventFilter() is good. isn't it ?
  Its fine and ok to use if u prefer over the mouseX methods.

• .i need a space area (just say weight of 5) around my Widget

One way to do this is via a layout. IF you add layout to window, and set
contentsMargins u can get such free area.
http://doc.qt.io/qt-5/qlayout.html#contentsMargins

[IMAN4K]

@mrjj
Is there another way for that area ?
Because if i implement mouseX events for my Widget and if cursor change happen, all around my widget cursor stay the same and i need that changing just for that edge area

[mrjj]

@IMAN4K
Hi
Im not sure of the issue
if mouse goes into area, u set it, if it leaves are u reset.
You can check in mouseMove if it leaves the area moving further into the widget.

so im not sure what ", all around my widget cursor stay the same"
means ?

[IMAN4K]

@mrjj said:

One way to do this is via a layout. IF you add layout to window, and set
contentsMargins u can get such free area

I'm confusing about this solution.
That require area i have mentioned must receivemouseEvents and you said you must set a Layout so Can Layouts receive mouseEvent ?

@mrjj said:

so im not sure what ", all around my widget cursor stay the same"
means ?

I mean if i implement mouseEvent for my widget after hovering cursor will change at the edge of my widget
it's good but if keep moving to widget(not leave the widget area) cursor will stay the same and will not change while cursor must return to arrow state if it pass that weight (5)

I hope i have been clear.

[mrjj]

@IMAN4K

• Can Layouts receive mouseEvent ?
  They should go to the Window Widget. or class that handles the
  cursor change.

• cursor must return to arrow state if it pass that weight (5)
  I guess detecting it by using mouseMove is too unreliable.

have you check if
http://doc.qt.io/qt-5/qwidget.html#leaveEvent
could be used?

[IMAN4K]

@mrjj
I think i finally figured it out ;)
But can you look at my code please :

class Widget : public QWidget {
	Q_OBJECT

public:
	explicit Widget();
	~Widget();
	void setBorderWidth(const qint16 &borderWidth);

private:
	enum Edge
	{
		None,
		Top,
		Bottom,
		Left,
		Right,
		TopLeft,
		TopRight,
		BottomLeft,
		BottomRight
	};
	QRubberBand *_rubberband;
	bool _cursorchanged;
	bool _leftButtonPressed;
	qint16 _borderWidth;
	Edge _edge;

private:
	void mouseHover(QHoverEvent *e);
	void mouseLeave(QEvent *e);
	void mousePress(QMouseEvent *e);
	void mouseRealese(QMouseEvent *e);
	void mouseMove(QMouseEvent *e);
	void updateCursorShape(const QPoint &pos);
	void calculateCursorPosition(const QPoint &pos);
	void updateRubberBand();

protected:
	void paintEvent(QPaintEvent *) Q_DECL_OVERRIDE;
	bool eventFilter(QObject *o, QEvent *e) Q_DECL_OVERRIDE;
};

Widget::Widget() :
_cursorchanged(false),
_borderWidth(4),
_edge(None),
_leftButtonPressed(false),
_rubberband(0)
{
	setMouseTracking(true);
	setWindowFlags(Qt::CustomizeWindowHint | Qt::FramelessWindowHint);
	setAttribute(Qt::WA_Hover);
	setAttribute(Qt::WA_TranslucentBackground);
	installEventFilter(this);
}

Widget::~Widget() {}

void Widget::paintEvent(QPaintEvent *) {
	QPainter painter(this);
	painter.setBrush(QColor("#FFFFFF"));
	painter.setPen(Qt::NoPen);
	painter.setRenderHint(QPainter::Antialiasing);

	QPainterPath path;
	path.addRoundedRect(QRect(0, 0, width(), height()), 5.0, 5.0);
	painter.drawPath(path.simplified());
}

bool Widget::eventFilter(QObject *o, QEvent*e) {
	if (e->type() == QEvent::MouseMove ||
		e->type() == QEvent::HoverMove ||
		e->type() == QEvent::Leave ||
		e->type() == QEvent::MouseButtonPress ||
		e->type() == QEvent::MouseButtonRelease) {

		switch (e->type())
		{
		default:
			break;
		case QEvent::MouseMove:
			mouseMove(static_cast<QMouseEvent*>(e));
			break;
		case QEvent::HoverMove:
			mouseHover(static_cast<QHoverEvent*>(e));
			break;
		case QEvent::Leave:
			mouseLeave(e);
			break;
		case QEvent::MouseButtonPress:
			mousePress(static_cast<QMouseEvent*>(e));
			break;
		case QEvent::MouseButtonRelease:
			mouseRealese(static_cast<QMouseEvent*>(e));
			break;
		}
	}
	return false;
}

void Widget::mouseHover(QHoverEvent *e) {
	updateCursorShape(mapToGlobal(e->pos()));

}

void Widget::mouseLeave(QEvent *e) {
	Q_UNUSED(e);
	unsetCursor();
}

void Widget::mousePress(QMouseEvent *e) {
	if (e->buttons() && Qt::LeftButton) {
		_leftButtonPressed = true;
		if (_edge != None) {
			updateRubberBand();
			_rubberband->setGeometry(frameGeometry().x(), frameGeometry().y(), frameGeometry().width(), frameGeometry().height());
		}
	}
}

void Widget::mouseRealese(QMouseEvent *e) {
		_leftButtonPressed = false;
		_edge = None;
		if (_rubberband) {
			updateRubberBand();
		}
}

void Widget::mouseMove(QMouseEvent *e) {
	if (_leftButtonPressed && _edge != None) {
		QRect originalRect = _rubberband->frameGeometry();
		int left = originalRect.left();
		int top = originalRect.top();
		int right = originalRect.right();
		int bottom = originalRect.bottom();
		if (_edge == Top) {
			top = e->globalPos().y();
		} else if (_edge == Bottom) {
			bottom = e->globalPos().y();
		} else if (_edge == Left) {
			left = e->globalPos().x();
		} else if (_edge == Right) {
			right = e->globalPos().x();
		} else if (_edge == TopLeft) {
			left = e->globalPos().x();
			top = e->globalPos().y();
		} else if (_edge == TopRight) {
			top = e->globalPos().y();
			right = e->globalPos().x();
		} else if (_edge == BottomLeft) {
			left = e->globalPos().x();
			bottom = e->globalPos().y();
		} else if (_edge == BottomRight) {
			bottom = e->globalPos().y();
			right = e->globalPos().x();
		}
		_rubberband->setGeometry(QRect(QPoint(left, top), QPoint(right, bottom)));
		setGeometry(_rubberband->geometry());
	}
}

void Widget::updateCursorShape(const QPoint &pos) {
	if (isFullScreen() || isMaximized()) { 
		if (_cursorchanged) {
			unsetCursor();
			return;
		}
	}
	calculateCursorPosition((pos));
	if (_edge == TopLeft || _edge == BottomRight) {
		setCursor(Qt::SizeFDiagCursor);
		_cursorchanged = true;
	} else if (_edge == TopRight || _edge == BottomLeft) {
		setCursor(Qt::SizeBDiagCursor);
		_cursorchanged = true;
	} else if (_edge == Right || _edge == Left) {
		setCursor(Qt::SizeHorCursor);
		_cursorchanged = true;
	} else if (_edge == Top || _edge == Bottom) {
		setCursor(Qt::SizeVerCursor);
		_cursorchanged = true;
	} else if (_cursorchanged) {
		_cursorchanged = false;
		unsetCursor();
	}
	
}

void Widget::calculateCursorPosition(const QPoint &pos) {
	bool onLeft = pos.x() <= frameGeometry().x() + _borderWidth && pos.x() >= frameGeometry().x() &&
		pos.y() <= frameGeometry().y() + frameGeometry().height() - _borderWidth && pos.y() >= frameGeometry().y() + _borderWidth;

	bool onRight = pos.x() >= frameGeometry().x() + frameGeometry().width() - _borderWidth && pos.x() <= frameGeometry().x() + frameGeometry().width() &&
		pos.y() >= frameGeometry().y() + _borderWidth && pos.y() <= frameGeometry().y() + frameGeometry().height() - _borderWidth - 2;

	bool onBottom = pos.x() >= frameGeometry().x() + _borderWidth && pos.x() <= frameGeometry().x() + frameGeometry().width() - _borderWidth - 2 &&
		pos.y() >= frameGeometry().y() + frameGeometry().height() - _borderWidth && pos.y() <= frameGeometry().y() + frameGeometry().height();

	bool onTop = pos.x() >= frameGeometry().x() + _borderWidth && pos.x() <= frameGeometry().x() + frameGeometry().width() - _borderWidth &&
		pos.y() >= frameGeometry().y() && pos.y() <= frameGeometry().y() + _borderWidth;

	bool  onBottomleft = pos.x() <= frameGeometry().x() + _borderWidth && pos.x() >= frameGeometry().x() &&
		pos.y() <= frameGeometry().y() + frameGeometry().height() && pos.y() >= frameGeometry().y() + frameGeometry().height() - _borderWidth;

	bool onBottomRight = pos.x() >= frameGeometry().x() + frameGeometry().width() - _borderWidth && pos.x() <= frameGeometry().x() + frameGeometry().width() &&
		pos.y() >= frameGeometry().y() + frameGeometry().height() - _borderWidth && pos.y() <= frameGeometry().y() + frameGeometry().height();

	bool onTopRight = pos.x() >= frameGeometry().x() + frameGeometry().width() - _borderWidth && pos.x() <= frameGeometry().x() + frameGeometry().width() &&
		pos.y() >= frameGeometry().y() && pos.y() <= frameGeometry().y() + _borderWidth;

	bool onTopLeft = pos.x() >= frameGeometry().x() && pos.x() <= frameGeometry().x() + _borderWidth &&
		pos.y() >= frameGeometry().y() && pos.y() <= frameGeometry().y() + _borderWidth;

    if (onLeft) {
		_edge = Left;
	} else if (onRight) {
		_edge = Right;
	} else if (onBottom) {
		_edge = Bottom;
	} else if (onTop) {
		_edge = Top;
	} else if (onBottomleft) {
		_edge = BottomLeft;
	} else if (onBottomRight) {
		_edge = BottomRight;
	} else if (onTopRight) {
		_edge = TopRight;
	} else if (onTopLeft) {
		_edge = TopLeft;
	} else {
		_edge = None;
	}
}

void Widget::updateRubberBand() {
	if (!_rubberband) {
		_rubberband = new QRubberBand(QRubberBand::Rectangle);
	} else {
		delete _rubberband;
		_rubberband = 0;
	}
}

void Widget::setBorderWidth(const qint16 &borderWidth) {
	_borderWidth = borderWidth;
}

It work but for top edge and left edge it's not working as i expect !

[mrjj]

Hi
Good work.
So for top/left what happens?

[IMAN4K]

@mrjj
It doesn't extend the widget from the top and left edge (+bottomLeft+topLeft+topRight) and i have no idea !
https://drive.google.com/file/d/0BxRSkzkLrTjVX18wd0U4YWZnVms/view?pref=2&pli=1
Thanks for your time.

[mrjj]

Ok
First. good job. Seem to work great.
I can see that dragging up seems not to work but
did not spot anything looking at code.

Is the code complete?
I can run it if I put in a default project?

[IMAN4K]

@mrjj

Is the code complete?

Yes It's complete

[mrjj]

@IMAN4K
Yep. Besides some #include it ran.

The reason up dont work is that it adjust the window the wrong way
(y++) so when u drag up, it goes down 1 pixel and then mouse is outside and the drag stops.

Not sure where the actual error is yet. Seems to be need minus and not plus
for drag that way.

[IMAN4K]

@mrjj
Still no idea ?
I'm really stuck !

[mrjj]

@IMAN4K
Sorry. nope.
Nothing jumped to mind.

Did you qDebug the points used for adjusting Geometry ?
To see how values are when is the Top case?

[IMAN4K]

Thanks @mrjj for all answers.
You were right calculating was mistake
I just used an inner space for calculating mouse area but you also need to consider an outer area (the green border) :
https://onedrive.live.com/redir?resid=8882D1E3BC0F61AB!7402&authkey=!ACT6umOQeAEcN7A&v=3&ithint=photo%2Cjpg
Here for any one else :

frameless.h:

#include <QtWidgets/QWidget>
#include <QtWidgets/QRubberBand>
#include <QtCore/QObject>
#include <QtCore/QEvent>
#include <QtCore/QRect>
#include <QtCore/QPoint>
#include <QtCore/Qt>
#include <QtGui/QHoverEvent>
#include <QtGui/QMouseEvent>

class FrameLess : public QObject {
public:
	enum Edge {
		None = 0x0,
		Left = 0x1,
		Top = 0x2,
		Right = 0x4,
		Bottom = 0x8,
		TopLeft = 0x10,
		TopRight = 0x20,
		BottomLeft = 0x40,
		BottomRight = 0x80,
	};
	Q_ENUM(Edge);
	Q_DECLARE_FLAGS(Edges, Edge);

	FrameLess(QWidget *parent);

	void setBorderWidth(int);
	int borderWidth() const;

	QWidget *_parent = nullptr;
	QRubberBand *_rubberband = nullptr;
	bool _cursorchanged;
	bool _leftButtonPressed;
	Edges _mousePress = Edge::None;
	Edges _mouseMove = Edge::None;
	int _borderWidth;

	QPoint _dragPos;
	bool _dragStart = false;

protected:
	bool eventFilter(QObject *o, QEvent *e) override;
	void mouseHover(QHoverEvent*);
	void mouseLeave(QEvent*);
	void mousePress(QMouseEvent*);
	void mouseRealese(QMouseEvent*);
	void mouseMove(QMouseEvent*);
	void updateCursorShape(const QPoint &);
	void calculateCursorPosition(const QPoint &, const QRect &, Edges &);
};

Q_DECLARE_OPERATORS_FOR_FLAGS(FrameLess::Edges);

frameless.cpp:

#include "FrameLess.h"

FrameLess::FrameLess(QWidget *parent) :
_parent(parent),
_cursorchanged(false),
_leftButtonPressed(false),
_borderWidth(5),
_dragPos(QPoint())
{
	_parent->setMouseTracking(true);
	_parent->setWindowFlags(Qt::FramelessWindowHint);
	_parent->setAttribute(Qt::WA_Hover);
	_parent->installEventFilter(this);
	_rubberband = new QRubberBand(QRubberBand::Rectangle);
}

bool FrameLess::eventFilter(QObject *o, QEvent*e) {
	if (e->type() == QEvent::MouseMove ||
		e->type() == QEvent::HoverMove ||
		e->type() == QEvent::Leave ||
		e->type() == QEvent::MouseButtonPress ||
		e->type() == QEvent::MouseButtonRelease) {

		switch (e->type()) {
		case QEvent::MouseMove:
			mouseMove(static_cast<QMouseEvent*>(e));
			return true;
			break;
		case QEvent::HoverMove:
			mouseHover(static_cast<QHoverEvent*>(e));
			return true;
			break;
		case QEvent::Leave:
			mouseLeave(e);
			return true;
			break;
		case QEvent::MouseButtonPress:
			mousePress(static_cast<QMouseEvent*>(e));
			return true;
			break;
		case QEvent::MouseButtonRelease:
			mouseRealese(static_cast<QMouseEvent*>(e));
			return true;
			break;
		}
	} else {
		return _parent->eventFilter(o, e);
	}
}

void FrameLess::mouseHover(QHoverEvent *e) {
	updateCursorShape(_parent->mapToGlobal(e->pos()));
}

void FrameLess::mouseLeave(QEvent *e) {
	if (!_leftButtonPressed) {
		_parent->unsetCursor();
	}
}

void FrameLess::mousePress(QMouseEvent *e) {
	if (e->button() & Qt::LeftButton) {
		_leftButtonPressed = true;
		calculateCursorPosition(e->globalPos(), _parent->frameGeometry(), _mousePress);
		if (!_mousePress.testFlag(Edge::None)) {
			_rubberband->setGeometry(_parent->frameGeometry());
		}
		if (_parent->rect().marginsRemoved(QMargins(borderWidth(),borderWidth(),borderWidth(),borderWidth())).contains(e->pos())) {
			_dragStart = true;
			_dragPos = e->pos();
		}
	}
}

void FrameLess::mouseRealese(QMouseEvent *e) {
	if (e->button() & Qt::LeftButton) {
		_leftButtonPressed = false;
		_dragStart = false;
	}
}

void FrameLess::mouseMove(QMouseEvent *e) {
	if (_leftButtonPressed) {
		if (_dragStart) {
			_parent->move(_parent->frameGeometry().topLeft() + (e->pos() - _dragPos));
		}

		if (!_mousePress.testFlag(Edge::None)) {
			int left = _rubberband->frameGeometry().left();
			int top = _rubberband->frameGeometry().top();
			int right = _rubberband->frameGeometry().right();
			int bottom = _rubberband->frameGeometry().bottom();
			switch (_mousePress) {
			case Edge::Top:
				top = e->globalPos().y();
				break;
			case Edge::Bottom:
				bottom = e->globalPos().y();
				break;
			case Edge::Left:
				left = e->globalPos().x();
				break;
			case Edge::Right:
				right = e->globalPos().x();
				break;
			case Edge::TopLeft:
				top = e->globalPos().y();
				left = e->globalPos().x();
				break;
			case Edge::TopRight:
				right = e->globalPos().x();
				top = e->globalPos().y();
				break;
			case Edge::BottomLeft:
				bottom = e->globalPos().y();
				left = e->globalPos().x();
				break;
			case Edge::BottomRight:
				bottom = e->globalPos().y();
				right = e->globalPos().x();
				break;
			}
			QRect newRect(QPoint(left, top), QPoint(right, bottom));
			if (newRect.width() < _parent->minimumWidth()) {
				left = _parent->frameGeometry().x();
			} else if (newRect.height() < _parent->minimumHeight()) {
				top = _parent->frameGeometry().y();
			}
			_parent->setGeometry(QRect(QPoint(left, top), QPoint(right, bottom)));
			_rubberband->setGeometry(QRect(QPoint(left, top), QPoint(right, bottom)));
		}
	} else {
		updateCursorShape(e->globalPos());
	}
}

void FrameLess::updateCursorShape(const QPoint &pos) {
	if (_parent->isFullScreen() || _parent->isMaximized()) {
		if (_cursorchanged) {
			_parent->unsetCursor();
		}
		return;
	}
	if (!_leftButtonPressed) {
		calculateCursorPosition(pos, _parent->frameGeometry(), _mouseMove);
		_cursorchanged = true;
		if (_mouseMove.testFlag(Edge::Top) || _mouseMove.testFlag(Edge::Bottom)) {
			_parent->setCursor(Qt::SizeVerCursor);
		} else if (_mouseMove.testFlag(Edge::Left) || _mouseMove.testFlag(Edge::Right)) {
			_parent->setCursor(Qt::SizeHorCursor);
		} else if (_mouseMove.testFlag(Edge::TopLeft) || _mouseMove.testFlag(Edge::BottomRight)) {
			_parent->setCursor(Qt::SizeFDiagCursor);
		} else if (_mouseMove.testFlag(Edge::TopRight) || _mouseMove.testFlag(Edge::BottomLeft)) {
			_parent->setCursor(Qt::SizeBDiagCursor);
		} else if (_cursorchanged) {
			_parent->unsetCursor();
			_cursorchanged = false;
		}
	}
}

void FrameLess::calculateCursorPosition(const QPoint &pos, const QRect &framerect, Edges &_edge) {
	bool onLeft = pos.x() >= framerect.x() - _borderWidth && pos.x() <= framerect.x() + _borderWidth &&
		pos.y() <= framerect.y() + framerect.height() - _borderWidth && pos.y() >= framerect.y() + _borderWidth;

	bool onRight = pos.x() >= framerect.x() + framerect.width() - _borderWidth && pos.x() <= framerect.x() + framerect.width() &&
		pos.y() >= framerect.y() + _borderWidth && pos.y() <= framerect.y() + framerect.height() - _borderWidth;

	bool onBottom = pos.x() >= framerect.x() + _borderWidth && pos.x() <= framerect.x() + framerect.width() - _borderWidth  &&
		pos.y() >= framerect.y() + framerect.height() - _borderWidth && pos.y() <= framerect.y() + framerect.height();

	bool onTop = pos.x() >= framerect.x() + _borderWidth && pos.x() <= framerect.x() + framerect.width() - _borderWidth &&
		pos.y() >= framerect.y() && pos.y() <= framerect.y() + _borderWidth;

	bool  onBottomLeft = pos.x() <= framerect.x() + _borderWidth && pos.x() >= framerect.x() &&
		pos.y() <= framerect.y() + framerect.height() && pos.y() >= framerect.y() + framerect.height() - _borderWidth;

	bool onBottomRight = pos.x() >= framerect.x() + framerect.width() - _borderWidth && pos.x() <= framerect.x() + framerect.width() &&
		pos.y() >= framerect.y() + framerect.height() - _borderWidth && pos.y() <= framerect.y() + framerect.height();

	bool onTopRight = pos.x() >= framerect.x() + framerect.width() - _borderWidth && pos.x() <= framerect.x() + framerect.width() &&
		pos.y() >= framerect.y() && pos.y() <= framerect.y() + _borderWidth;

	bool onTopLeft = pos.x() >= framerect.x() && pos.x() <= framerect.x() + _borderWidth &&
		pos.y() >= framerect.y() && pos.y() <= framerect.y() + _borderWidth;

	if (onLeft) {
		_edge = Left;
	} else if (onRight) {
		_edge = Right;
	} else if (onBottom) {
		_edge = Bottom;
	} else if (onTop) {
		_edge = Top;
	} else if (onBottomLeft) {
		_edge = BottomLeft;
	} else if (onBottomRight) {
		_edge = BottomRight;
	} else if (onTopRight) {
		_edge = TopRight;
	} else if (onTopLeft) {
		_edge = TopLeft;
	} else {
		_edge = None;
	}
}

void FrameLess::setBorderWidth(int borderWidth) {
	_borderWidth = borderWidth;
}

int FrameLess::borderWidth() const {
	return _borderWidth;
}

[mrjj]

Good found.
Thx for reporting back.
Im sure someone will re-use this some day.

[wrekler]

I found very usefull this class, I added some code to handle correctly a maximized FrameLess Widget.
In

void FrameLess::mouseMove(QMouseEvent *e) {
	if (_dragStart) {
		if (_parent->isMaximized()) { //this will handle correctly dragging when it is maximized
			maximizeWidth = _parent->width(); //maximizeWidth is an int attribute
			_parent->showNormal();
		}
		if (_dragPos.x() > _parent->width())
			_dragPos.setX((_parent->width()*_dragPos.x()) / maximizeWidth);
		_parent->move(e->globalX() - _dragPos.x(), e->globalY() - _dragPos.y());
	}
	if (!_mousePress.testFlag(Edge::None) && !_parent->isMaximized() ) { //this prevent resizing if it is maximized
		[...]

Now I'm wondering if there is a way to implement Windows 7/10 autosize function (the function when you drag a window on top/left/right/bottom edge of desktop and it will maximize/resize to half desktop size) on a frameless widget!