[solved] why the Qt program is used libts-0.0.so.0 in mini2440?
-
What example is it ?
-
It's not exactly clear that what is your problem from the description you have provided but I hope you find these info I'm providing helpful:
-
you need to find out whether the device driver for your touchscreen device is installed and working properly. If it's a USB one disconnect and connect it again and then in your terminal run
dmesgcommand and see the few last lines and check if there's any info about touch screen device available and also if it's configured and working properly i.e. no warnings or errors. -
touch screen is handled like mouse, user space applications don't see the difference. it's handled under the hood.
-
if you are using X window manager then you might need
xorg-xserver-input-*(replace the * with the one required for your case) packages installed.
Also try to see if you can use later versions of Qt. I've worked with mini2440 and have successfully installed Qt 5.0.0 on it. Could you tell us what operating system you are using on your ARM device? I hope it's not the default one provided with the board :)
-
-
Hi.
@SGaist the example i said ,I mean the demo in first topic i said.
@morkia this topic is my base question about mini2440. when i reinstall Linux on mini2440 and does not make static link at first ( for this error: libts-0.0.so.0 is a shared library or ...) i was running my app and the touch not worked. i tested it with the demo in mini2440 but it shows this library error. ( this is all my story :D ).
my linux version is 2.6.32.2.this is dmesg
[root@FriendlyARM /]# uname -a
Linux FriendlyARM 2.6.32.2-FriendlyARM #16 Tue Dec 23 15:08:43 CST 2014 armv4tl unknown[root@FriendlyARM /]# dmesg
51 MAC: 08:90:90:90:90:90 (chip)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.32.2-FriendlyARM ohci_hcd
usb usb1: SerialNumber: s3c24xx
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for aircable
usbcore: registered new interface driver aircable
USB Serial support registered for ark3116
usbcore: registered new interface driver ark3116
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver belkin
belkin_sa: v1.2:USB Belkin Serial converter driver
USB Serial support registered for ch341-uart
usbcore: registered new interface driver ch341
USB Serial support registered for cp210x
usbcore: registered new interface driver cp210x
cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
USB Serial support registered for Reiner SCT Cyberjack USB card reader
usbcore: registered new interface driver cyberjack
cyberjack: v1.01 Matthias Bruestle
cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
USB Serial support registered for DeLorme Earthmate USB
USB Serial support registered for HID->COM RS232 Adapter
USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver cypress
cypress_m8: v1.09:Cypress USB to Serial Driver
USB Serial support registered for Digi 2 port USB adapter
USB Serial support registered for Digi 4 port USB adapter
usbcore: registered new interface driver digi_acceleport
digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
USB Serial support registered for Edgeport 2 port adapter
USB Serial support registered for Edgeport 4 port adapter
USB Serial support registered for Edgeport 8 port adapter
USB Serial support registered for EPiC device
usbcore: registered new interface driver io_edgeport
io_edgeport: v2.7:Edgeport USB Serial Driver
USB Serial support registered for Edgeport TI 1 port adapter
USB Serial support registered for Edgeport TI 2 port adapter
usbcore: registered new interface driver io_ti
io_ti: v0.7mode043006:Edgeport USB Serial Driver
USB Serial support registered for empeg
usbcore: registered new interface driver empeg
empeg: v1.2:USB Empeg Mark I/II Driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
USB Serial support registered for funsoft
usbcore: registered new interface driver funsoft
USB Serial support registered for Garmin GPS usb/tty
usbcore: registered new interface driver garmin_gps
garmin_gps: v0.33:garmin gps driver
USB Serial support registered for hp4X
usbcore: registered new interface driver hp4X
hp4x: v1.00:HP4x (48/49) Generic Serial driver
USB Serial support registered for PocketPC PDA
usbcore: registered new interface driver ipaq
ipaq: v0.5:USB PocketPC PDA driver
USB Serial support registered for IPWireless converter
usbcore: registered new interface driver ipwtty
ipw: v0.3:IPWireless tty driver
USB Serial support registered for IR Dongle
usbcore: registered new interface driver ir-usb
ir_usb: v0.4:USB IR Dongle driver
USB Serial support registered for iuu_phoenix
usbcore: registered new interface driver iuu_phoenix
iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
USB Serial support registered for Keyspan - (without firmware)
USB Serial support registered for Keyspan 1 port adapter
USB Serial support registered for Keyspan 2 port adapter
USB Serial support registered for Keyspan 4 port adapter
usbcore: registered new interface driver keyspan
keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
USB Serial support registered for Keyspan PDA
USB Serial support registered for Keyspan PDA - (prerenumeration)
USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
usbcore: registered new interface driver keyspan_pda
keyspan_pda: v1.1:USB Keyspan PDA Converter driver
USB Serial support registered for KL5KUSB105D / PalmConnect
usbcore: registered new interface driver kl5kusb105d
kl5kusb105: v0.3a:KLSI KL5KUSB105 chipset USB->Serial Converter driver
USB Serial support registered for KOBIL USB smart card terminal
usbcore: registered new interface driver kobil
kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
USB Serial support registered for MCT U232
usbcore: registered new interface driver mct_u232
mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
USB Serial support registered for Moschip 2 port adapter
mos7720: 1.0.0.4F:Moschip USB Serial Driver
usbcore: registered new interface driver moschip7720
USB Serial support registered for Moschip 7840/7820 USB Serial Driver
mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
usbcore: registered new interface driver mos7840
USB Serial support registered for moto-modem
usbcore: registered new interface driver moto-modem
USB Serial support registered for navman
usbcore: registered new interface driver navman
USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver omninet
omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
USB Serial support registered for opticon
usbcore: registered new interface driver opticon
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for oti6858
usbcore: registered new interface driver oti6858
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver qcserial
safe_serial: v0.0b:USB Safe Encapsulated Serial
USB Serial support registered for safe_serial
usbcore: registered new interface driver safe_serial
USB Serial support registered for siemens_mpi
usbcore: registered new interface driver siemens_mpi
Driver for Siemens USB/MPI adapter
Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
USB Serial support registered for SPCP8x5
usbcore: registered new interface driver spcp8x5
spcp8x5: v0.04:SPCP8x5 USB to serial adaptor driver
USB Serial support registered for symbol
usbcore: registered new interface driver symbol
USB Serial support registered for TI USB 3410 1 port adapter
USB Serial support registered for TI USB 5052 2 port adapter
usbcore: registered new interface driver ti_usb_3410_5052
ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver
USB Serial support registered for Handspring Visor / Palm OS
USB Serial support registered for Sony Clie 3.5
USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
USB Serial support registered for Connect Tech - WhiteHEAT
usbcore: registered new interface driver whiteheat
whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
mice: PS/2 mouse device common for all mice
s3c2410 TouchScreen successfully loaded
input: s3c2410 TouchScreen as /devices/virtual/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
gspca: main v2.7.0 registered
usbcore: registered new interface driver conex
conex: registered
usbcore: registered new interface driver etoms
etoms: registered
usbcore: registered new interface driver finepix
finepix: registered
usbcore: registered new interface driver jeilinj
jeilinj: registered
usbcore: registered new interface driver mars
mars: registered
usbcore: registered new interface driver mr97310a
mr97310a: registered
usbcore: registered new interface driver ov519
ov519: registered
usbcore: registered new interface driver ov534
ov534: registered
usbcore: registered new interface driver pac207
pac207: registered
usbcore: registered new interface driver pac7311
pac7311: registered
usbcore: registered new interface driver sn9c20x
sn9c20x: registered
usbcore: registered new interface driver sonixb
sonixb: registered
usbcore: registered new interface driver sonixj
sonixj: registered
usbcore: registered new interface driver spca500
spca500: registered
usbcore: registered new interface driver spca501
spca501: registered
usbcore: registered new interface driver spca505
spca505: registered
usbcore: registered new interface driver spca506
spca506: registered
usbcore: registered new interface driver spca508
spca508: registered
usbcore: registered new interface driver spca561
spca561: registered
usbcore: registered new interface driver sq905
sq905: registered
usbcore: registered new interface driver sq905c
sq905c: registered
usbcore: registered new interface driver sunplus
sunplus: registered
usbcore: registered new interface driver stk014
stk014: registered
usbcore: registered new interface driver t613
t613: registered
usbcore: registered new interface driver tv8532
tv8532: registered
usbcore: registered new interface driver vc032x
vc032x: registered
usbcore: registered new interface driver zc3xx
zc3xx: registered
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
usbcore: registered new interface driver STV06xx
STV06xx: registered
gspca_gl860: driver startup - version 0.9d10
usbcore: registered new interface driver gspca_gl860
gspca_gl860: driver registered
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
SCCB address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
SCCB address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
No OV9650 found!!!
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
s3c-sdi s3c2440-sdi: powered down.
s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
#0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
NET: Registered protocol family 17
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505859 name is "mtdblock3"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.3, "mtdblock3"
yaffs: auto selecting yaffs2
block 452 is bad
block 481 is bad
block 516 is bad
block 522 is bad
Partially written block 685 detected
.
.
.
Partially written block 685 detected
Partially written block 712 detected
.
.
.
Partially written block 712 detectedyaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 156K
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1sorry but i do not know about if I have error or not. and what is the meaning of that line i bold them.
if you are using X window manager then you might need xorg-xserver-input-* (replace the * with the one required for your case) packages installed.
i don't know X window manager.
Also try to see if you can use later versions of Qt. I've worked with mini2440 and have successfully installed Qt 5.0.0 on it. Could you tell us what operating system you are using on your ARM device? I hope it's not the default one provided with the board :)
Unfortunately, I used the basic Qt (Qt4.6.3). I don't know how to install new Qt on my board. :D
-
If you are running a Linux on your PC or Laptop then you are most certainly using the X window manager. Just search it in your favorite search engine like Google. Most modern arm processors are capable of running X window manager like Tiny X. How did you build the Linux for your board?
in your
dmesgoutput the lineinput: s3c2410 TouchScreen as /devices/virtual/input/input0shows that you have the driver loaded for your kernel. If it works outside the Qt then there's something wrong within your code just post a snippet of your code so I can see where the problem might be.The parts that you have highlighted are related to your MTD device. Don't worry about them those are managed by your hardware automatically. If you swith off your board without properly shutting it down first, that could happen (an unsuccessful write damaged a block in your memory like a bad sector in your hard drive). Also the YAFFS2 file system scans for those blocks and then reuse them during it's garbage collection.
Also, You have marked your issue as solved. Is it really solved or you still have problems with it?
-
Hi and thanks for reply @morkia
thanks for your describe. :)Also, You have marked your issue as solved. Is it really solved or you still have problems with it?
my main problem not solved. but the question in this topic is solved.
If it works outside the Qt then there's something wrong within your code just post a snippet of your code so I can see where the problem might be
this is my program that i uploaded. it is a simple hello world with Qt 4.6.3:http://project-free-upload.com/sg5yrgxi2ixs
-
at first my program has a click when it clicked show a message to say hello but the touch not worked. i think maybe my program has error. so i make a simple program to just show a simple label. but when i run it . the mouse is place the center screen and dose not change the location when i touch the display.
-
Place a button or something that accepts a click and then test your program. Don't pay attention to the cursor you see. If you don't have a window manager (which is very likely considering you are using an ancient arm device) then your cursor might not move around because there's no program to handle that for you. Remember everything is a software. It doesn't come by itself. So if you place a button or any widget that reacts to click events in your software, Does that work?
-
Hi and thanks for reply @morkia @SGaist . (and Sorry cause I am so busy because changing my home and cant see this topic)
@morkia : I said that my first program is a window with a button. when i clicked the button show message. but nothing worked in my app (just display the window with button). I guessed maybe the ARM device does not support the QmessegeBox. so I changed my app to a simple hello word with a simple label. but the touch not worked. (that program with message box is worked on tiny6410)
@SGaist : I called my program like this:cd /udisk/
./prj3 -qwsbut just display my app with no touch. my last Topic
-
I could help you better if you would tell me what kind of Linux you are using and how you installed it on your board. I might tell you how to build a Linux for your board here, But first I should know if it's done correctly. All I can sense from here is an incorrectly configured installation of Linux. Tell me if you are interested.
-
@morkia said:
If you don't have a window manager (which is very likely considering you are using an ancient arm device)
Again, this part has not much to do with the age of the device, Qt for Embedded Linux with the Qt Windowing System was already running on ARM devices more than 10 years ago.
Part of the problem is here is that just saying -qws doesn't tell Qt that you have a touch screen at hand. You need to tell it that you are using TSLib. It's described here
-
@SGaist Yes but in my personal experience It's better to use a window manager like tiny X. Also since Qt is usually compiled from source for such cases, it's difficult for new and inexperienced users to get it to work right i.e. supplying proper configurations etc.
This is the reason I'm continuously asking her to tell me how she has built the Linux for her device. If she uses X, then she won't have to worry about input device handling. It simply becomes transparent to her.
by that statement I meant the way Linux is usually built and deployed on devices like hers.
-
@morika : Hi and thanks. I really want to know how to enable touch and understand the ARM structure.
I could help you better if you would tell me what kind of Linux you are using
[root@FriendlyARM /]# uname -a
Linux FriendlyARM 2.6.32.2-FriendlyARM #16 Tue Dec 23 15:08:43 CST 2014 armv4tl unknownhow you installed it on your board
like the other website says : connect it with serial port and usb. in DNW set the port . press the key :
x
f
v->supervivi128
q
->change the kernel size and root size and set param to mtdblock3
k->load zImage_T35(the screen type)
y->rootf about 85MB
b->boot the Linux.
the the Linux is installed.@SGaist : really thanks.
by that topic link :
[root@FriendlyARM /]# ls -la /dev/input
drwxr-xr-x 2 root root 0 Jan 1 08:00 .
drwxr-xr-x 7 root root 0 Jan 1 08:00 ..
crw-rw---- 1 root root 13, 64 Jan 1 08:00 event0
crw-rw---- 1 root root 13, 63 Jan 1 08:00 miceI changed them by the last code in that topic : chmod a+rw /dev/input/mouse0 ( i have mice instead of mouse0 so edit it)
[root@FriendlyARM /udisk]# ls -la /dev/input
drwxr-xr-x 2 root root 0 Jan 1 08:00 .
drwxr-xr-x 7 root root 0 Jan 1 08:00 ..
crw-rw-rw- 1 root root 13, 64 Jan 1 08:00 event0
crw-rw-rw- 1 root root 13, 63 Jan 1 08:00 micebut no touch again. ( ts_calibrate worked but my application touch not work)
Part of the problem is here is that just saying -qws doesn't tell Qt that you have a touch screen at hand.
I think I don't understand it !!the device demo is worked with this parameter./fluidluncher -qws -> this is worker completely even touch work.
-
ARM is just a processor architecture, you can find yourself having the exact same problem on x86. What matters more is the distribution you use as well as the kernel.
Did you compile fluidlauncher yourself ?
-
No, not your compiler, just trying to narrow down the sources of your problem. Are you using a custom compiled Qt or the same provided on your board ?
-
@SGaist : I used arm-linux-gcc4.4.3 and qt4.6.3. I downloaded from internet.
In most sites i saw for tiny6410 at first install tslib( and also mini2440) but in tiny6410 pdf does not do that. I install everything exactly like pdf. and everything is worked ( without tslib installation ). and my app is worked perfectly over tiny6410 ( the touch is work too). I wanna to say is it possible my device (mini2440) have problem or another problem ? I am so confused. O.o -
You should check for the differences between the two hardware and software wise
