Build Qt creator 3.4 on pi 2 [RESOLVED]
-
In my usr/local/qt5/bin i have this :
*qdbuscpp2xml qml qtdiag xmlpatterns
lconvert qdbusviewer qmlimportscanner qtpaths xmlpatternsvalidator
lrelease qdbusxml2cpp qmllint qtplugininfo
lupdate qdoc qmlmin rcc
moc qlalr qmlscene syncqt.pl
qdbus qmake qmltestrunner uic
*and in my local folder (use to build qt) , /home/pi/opt/qt5/qttools/bin :
lconvert lrelease lupdate qdbus qdbusviewer qtdiag qtpaths qtplugininfo
i don't have designer ! Do you know how i can proceed ?
-
i make some progress, i had build designer (need to build lib folder first in qt5/qttools/src/designer/src/). After that i retry a qmake and make. After a certain time i had this error :
../3rdparty/botan/botan.cpp:46208:21: fatal error: cpuid.h: No such file or directory
compilation terminated.
.
.
.
Makefile:4294: recipe for target '.obj/release-shared/botan.o' failed
make[3]: *** [.obj/release-shared/botan.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/home/pi/opt/qt-creator-master/src/libs/ssh'
Makefile:285: recipe for target 'sub-ssh-make_first' failed
make[2]: *** [sub-ssh-make_first] Error 2
make[2]: Leaving directory '/home/pi/opt/qt-creator-master/src/libs'
Makefile:45: recipe for target 'sub-libs-make_first-ordered' failed
make[1]: *** [sub-libs-make_first-ordered] Error 2
make[1]: Leaving directory '/home/pi/opt/qt-creator-master/src'
Makefile:43: recipe for target 'sub-src-make_first-ordered' failed
make: *** [sub-src-make_first-ordered] Error 2I found this thread about this bug :
hereand the solution :
I have downloaded botan.cpp and botan.h and replace them in qt-creator-master/src/libs/3rdparty/botan.
Then i re-launch make, and now i have this error :
ln -s libQtcSsh.so.1.0.0 libQtcSsh.so
ln -s libQtcSsh.so.1.0.0 libQtcSsh.so.1
ln -s libQtcSsh.so.1.0.0 libQtcSsh.so.1.0
rm -f ../../../lib/qtcreator/libQtcSsh.so.1.0.0
mv -f libQtcSsh.so.1.0.0 ../../../lib/qtcreator/
rm -f ../../../lib/qtcreator/libQtcSsh.so
rm -f ../../../lib/qtcreator/libQtcSsh.so.1
rm -f ../../../lib/qtcreator/libQtcSsh.so.1.0
mv -f libQtcSsh.so ../../../lib/qtcreator/
mv -f libQtcSsh.so.1 ../../../lib/qtcreator/
mv -f libQtcSsh.so.1.0 ../../../lib/qtcreator/
make[3]: Leaving directory '/home/pi/opt/qt-creator-master/src/libs/ssh'
make[2]: Leaving directory '/home/pi/opt/qt-creator-master/src/libs'
Makefile:45: recipe for target 'sub-libs-make_first-ordered' failed
make[1]: *** [sub-libs-make_first-ordered] Error 2
make[1]: Leaving directory '/home/pi/opt/qt-creator-master/src'
Makefile:43: recipe for target 'sub-src-make_first-ordered' failed
make: *** [sub-src-make_first-ordered] Error 2HELP please !
-
See this error, i'm trying to build manually libs, but i had this error :
shellcommand.cpp:88:84: sorry, unimplemented: non-static data member initializers
shellcommand.cpp:88:84: error: in-class initialization of static data member ‘m_proxyFactory’ of non-literal type
shellcommand.cpp: In member function ‘virtual Utils::SynchronousProcessResponse Utils::ShellCommand::runCommand(const Utils::FileName&, const QStringList&, int, Utils::ExitCodeInterpreter)’:
shellcommand.cpp:320:42: error: ‘class Utils::Internal::ShellCommandPrivate’ has no member named ‘m_proxyFactory’
shellcommand.cpp: In member function ‘Utils::SynchronousProcessResponse Utils::ShellCommand::runSynchronous(const Utils::FileName&, const QStringList&, int, Utils::ExitCodeInterpreter)’:
shellcommand.cpp:401:42: error: ‘class Utils::Internal::ShellCommandPrivate’ has no member named ‘m_proxyFactory’
shellcommand.cpp: In member function ‘virtual bool Utils::ShellCommand::runFullySynchronous(const Utils::FileName&, const QStringList&, int, QByteArray, QByteArray*)’:
shellcommand.cpp:463:42: error: ‘class Utils::Internal::ShellCommandPrivate’ has no member named ‘m_proxyFactory’
shellcommand.cpp: In member function ‘void Utils::ShellCommand::setOutputProxyFactory(const std::functionUtils::OutputProxy*()&)’:
shellcommand.cpp:527:8: error: ‘class Utils::Internal::ShellCommandPrivate’ has no member named ‘m_proxyFactory’
Makefile:8457: recipe for target '.obj/release-shared/shellcommand.o' failed
make[1]: [.obj/release-shared/shellcommand.o] Error 1
make[1]: Waiting for unfinished jobs....
make[1]: Leaving directory '/home/pi/opt/qt-creator-master/src/libs/utils'
Makefile:106: recipe for target 'sub-utils-make_first' failed
make: [sub-utils-make_first] Error 2***and if i try to build utils :
i obtained this :
Makefile:8457: recipe for target '.obj/release-shared/shellcommand.o' failed
make: *** [.obj/release-shared/shellcommand.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from filesearch.cpp:31:0:
filesearch.h:106:23: error: expected ‘;’ at end of member declaration
filesearch.h:106:29: error: ‘override’ does not name a type
filesearch.h:107:27: error: expected ‘;’ at end of member declaration
filesearch.h:107:33: error: ‘override’ does not name a type
filesearch.h:110:35: error: expected ‘;’ at end of member declaration
filesearch.h:110:37: error: ‘override’ does not name a type
filesearch.h:111:28: error: expected ‘;’ at end of member declaration
filesearch.h:111:34: error: ‘override’ does not name a type
filesearch.h:112:31: error: expected ‘;’ at end of member declaration
filesearch.h:112:37: error: ‘override’ does not name a type
filesearch.h:113:36: error: expected ‘;’ at end of member declaration
filesearch.h:113:42: error: ‘override’ does not name a type
filesearch.h:128:23: error: expected ‘;’ at end of member declaration
filesearch.h:128:29: error: ‘override’ does not name a type
filesearch.h:129:27: error: expected ‘;’ at end of member declaration
filesearch.h:129:33: error: ‘override’ does not name a type
filesearch.h:132:35: error: expected ‘;’ at end of member declaration
filesearch.h:132:37: error: ‘override’ does not name a type
filesearch.h:133:28: error: expected ‘;’ at end of member declaration
filesearch.h:133:34: error: ‘override’ does not name a type
filesearch.h:134:31: error: expected ‘;’ at end of member declaration
filesearch.h:134:37: error: ‘override’ does not name a type
filesearch.h:135:36: error: expected ‘;’ at end of member declaration
filesearch.h:135:42: error: ‘override’ does not name a type
Makefile:9170: recipe for target '.obj/release-shared/filesearch.o' failed
make: *** [.obj/release-shared/filesearch.o] Error 1 -
today i have make another progress ! i downloaded qt creator 3.4.1 (before i take master branch). Replace botan.c and header and after many hours hours qt creator build successful !!!
New problem, now when i launch qtcreator since terminal i have this message :pi@raspberrypi ~/opt/qt-creator-opensource-src-3.4.1/bin $ ./qtcreator
[9;0]Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
No tool chain set from kit "Desktop".
No tool chain set from kit "Desktop".
EGLFS: OpenGL windows cannot be mixed with others.
AbortedSame question, do you have a solution ? Do i need to use qtwayland to use qt app (like qt creator)
-
Are you running an X server on your raspberry pi 2 ?
-
I don't know, i had just downloaded the last debian image last week and no modification for the desktop ! If i understand i can't use more than one windows with eglfs, and it must full screen ? If i want to use X11, i need xcb plugin but i don't know if i have it, and there is no opengl support on it ? Perhaps the better solution is to use wayland ? Do you know lxQt (but for the moment no support for arm platform ...) ?
-
If you are running a desktop on your Pi 2 then you're likely running an X server. For the eglfs part, you can only have one top level window and the first one is forced to be fullscreen, then you can have several non-toplevel widgets. What you can't have is several GUI application running at the same time.
I can't tell if you have the xcb plugin, I don't know the configure options you used.
It depends on your application needs.
I've heard of it but it's been some times since I last read about it
-
Thank's for your help. i also tried to launch qtcreator with no desktop start (startx) at the login but i have the same error ... How i can set QT_QPA_EGLFS_PHYSICAL_WIDTH and Height ? For this error : No tool chain set from kit "Desktop", it's important to correct it or it's just a warning that i can resolve later ?
-
export QT_QPA_EGLFS_PHYSICAL_WIDTH=XXXThe no tool chain error means that either you don't have a compiler installed, or Qt Creator didn't find one, in any case, it doesn't influence the startup of Qt Creator.
-
-
You can disable the welcome plugin when starting Qt Creator
-
